1: |
hasTemporalExtents = 0 |
1: |
hasTemporalExtents = 0 |
2: |
minTemporalExtents = 0 |
2: |
minTemporalExtents = 0 |
3: |
maxTemporalExtents = 0 |
3: |
maxTemporalExtents = 0 |
4: |
numStates = 12 |
4: |
numStates = 12 |
5: |
isVirtualDatabase = 0 |
5: |
isVirtualDatabase = 0 |
6: |
mustRepopulateOnStateChange = 0 |
6: |
mustRepopulateOnStateChange = 0 |
7: |
mustAlphabetizeVariables = 1 |
7: |
mustAlphabetizeVariables = 1 |
8: |
formatCanDoDomainDecomposition = 0 |
8: |
formatCanDoDomainDecomposition = 0 |
9: |
formatCanDoMultires = 0 |
9: |
formatCanDoMultires = 0 |
10: |
useCatchAllMesh = 0 |
10: |
useCatchAllMesh = 0 |
11: |
timeStepPath = "" |
11: |
timeStepPath = "" |
12: |
timeStepNames = ("VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d") |
12: |
timeStepNames = ("VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d") |
13: |
cycles = (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11) |
13: |
cycles = (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11) |
14: |
cyclesAreAccurate = (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) |
14: |
cyclesAreAccurate = (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) |
15: |
times = (1200, 1210, 1220, 1230, 1240, 1250, 1300, 1310, 1320, 1330, 1340, 1350) |
15: |
times = (1200, 1210, 1220, 1230, 1240, 1250, 1300, 1310, 1320, 1330, 1340, 1350) |
16: |
timesAreAccurate = (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) |
16: |
timesAreAccurate = (0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) |
17: |
databaseName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
17: |
databaseName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
18: |
fileFormat = "PLOT3D_1.0" |
18: |
fileFormat = "PLOT3D_1.0" |
19: |
databaseComment = "" |
19: |
databaseComment = "" |
20: |
exprList.GetExpressions(0).name = "Free-stream mach number" |
20: |
exprList.GetExpressions(0).name = "Free-stream mach number" |
21: |
exprList.GetExpressions(0).definition = "2.950000" |
21: |
exprList.GetExpressions(0).definition = "2.950000" |
22: |
exprList.GetExpressions(0).hidden = 0 |
22: |
exprList.GetExpressions(0).hidden = 0 |
23: |
exprList.GetExpressions(0).type = exprList.GetExpressions(0).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
23: |
exprList.GetExpressions(0).type = exprList.GetExpressions(0).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
24: |
exprList.GetExpressions(0).fromDB = 1 |
24: |
exprList.GetExpressions(0).fromDB = 1 |
25: |
exprList.GetExpressions(0).fromOperator = 0 |
25: |
exprList.GetExpressions(0).fromOperator = 0 |
26: |
exprList.GetExpressions(0).operatorName = "__none__" |
26: |
exprList.GetExpressions(0).operatorName = "__none__" |
27: |
exprList.GetExpressions(0).meshName = "" |
27: |
exprList.GetExpressions(0).meshName = "" |
28: |
exprList.GetExpressions(0).dbName = "" |
28: |
exprList.GetExpressions(0).dbName = "" |
29: |
exprList.GetExpressions(0).autoExpression = 0 |
29: |
exprList.GetExpressions(0).autoExpression = 0 |
30: |
exprList.GetExpressions(1).name = "Angle of attack" |
30: |
exprList.GetExpressions(1).name = "Angle of attack" |
31: |
exprList.GetExpressions(1).definition = "0.000000" |
31: |
exprList.GetExpressions(1).definition = "0.000000" |
32: |
exprList.GetExpressions(1).hidden = 0 |
32: |
exprList.GetExpressions(1).hidden = 0 |
33: |
exprList.GetExpressions(1).type = exprList.GetExpressions(1).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
33: |
exprList.GetExpressions(1).type = exprList.GetExpressions(1).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
34: |
exprList.GetExpressions(1).fromDB = 1 |
34: |
exprList.GetExpressions(1).fromDB = 1 |
35: |
exprList.GetExpressions(1).fromOperator = 0 |
35: |
exprList.GetExpressions(1).fromOperator = 0 |
36: |
exprList.GetExpressions(1).operatorName = "__none__" |
36: |
exprList.GetExpressions(1).operatorName = "__none__" |
37: |
exprList.GetExpressions(1).meshName = "" |
37: |
exprList.GetExpressions(1).meshName = "" |
38: |
exprList.GetExpressions(1).dbName = "" |
38: |
exprList.GetExpressions(1).dbName = "" |
39: |
exprList.GetExpressions(1).autoExpression = 0 |
39: |
exprList.GetExpressions(1).autoExpression = 0 |
40: |
exprList.GetExpressions(2).name = "Reynold's number" |
40: |
exprList.GetExpressions(2).name = "Reynold's number" |
41: |
exprList.GetExpressions(2).definition = "2100000.000000" |
41: |
exprList.GetExpressions(2).definition = "2100000.000000" |
42: |
exprList.GetExpressions(2).hidden = 0 |
42: |
exprList.GetExpressions(2).hidden = 0 |
43: |
exprList.GetExpressions(2).type = exprList.GetExpressions(2).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
43: |
exprList.GetExpressions(2).type = exprList.GetExpressions(2).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
44: |
exprList.GetExpressions(2).fromDB = 1 |
44: |
exprList.GetExpressions(2).fromDB = 1 |
45: |
exprList.GetExpressions(2).fromOperator = 0 |
45: |
exprList.GetExpressions(2).fromOperator = 0 |
46: |
exprList.GetExpressions(2).operatorName = "__none__" |
46: |
exprList.GetExpressions(2).operatorName = "__none__" |
47: |
exprList.GetExpressions(2).meshName = "" |
47: |
exprList.GetExpressions(2).meshName = "" |
48: |
exprList.GetExpressions(2).dbName = "" |
48: |
exprList.GetExpressions(2).dbName = "" |
49: |
exprList.GetExpressions(2).autoExpression = 0 |
49: |
exprList.GetExpressions(2).autoExpression = 0 |
50: |
exprList.GetExpressions(3).name = "Integration time" |
50: |
exprList.GetExpressions(3).name = "Integration time" |
51: |
exprList.GetExpressions(3).definition = "1.391100" |
51: |
exprList.GetExpressions(3).definition = "1.391100" |
52: |
exprList.GetExpressions(3).hidden = 0 |
52: |
exprList.GetExpressions(3).hidden = 0 |
53: |
exprList.GetExpressions(3).type = exprList.GetExpressions(3).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
53: |
exprList.GetExpressions(3).type = exprList.GetExpressions(3).Unknown # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
54: |
exprList.GetExpressions(3).fromDB = 1 |
54: |
exprList.GetExpressions(3).fromDB = 1 |
55: |
exprList.GetExpressions(3).fromOperator = 0 |
55: |
exprList.GetExpressions(3).fromOperator = 0 |
56: |
exprList.GetExpressions(3).operatorName = "__none__" |
56: |
exprList.GetExpressions(3).operatorName = "__none__" |
57: |
exprList.GetExpressions(3).meshName = "" |
57: |
exprList.GetExpressions(3).meshName = "" |
58: |
exprList.GetExpressions(3).dbName = "" |
58: |
exprList.GetExpressions(3).dbName = "" |
59: |
exprList.GetExpressions(3).autoExpression = 0 |
59: |
exprList.GetExpressions(3).autoExpression = 0 |
60: |
exprList.GetExpressions(4).name = "Velocity_magnitude" |
60: |
exprList.GetExpressions(4).name = "Velocity_magnitude" |
61: |
exprList.GetExpressions(4).definition = "magnitude(<Velocity>)" |
61: |
exprList.GetExpressions(4).definition = "magnitude(<Velocity>)" |
62: |
exprList.GetExpressions(4).hidden = 0 |
62: |
exprList.GetExpressions(4).hidden = 0 |
63: |
exprList.GetExpressions(4).type = exprList.GetExpressions(4).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
63: |
exprList.GetExpressions(4).type = exprList.GetExpressions(4).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
64: |
exprList.GetExpressions(4).fromDB = 1 |
64: |
exprList.GetExpressions(4).fromDB = 1 |
65: |
exprList.GetExpressions(4).fromOperator = 0 |
65: |
exprList.GetExpressions(4).fromOperator = 0 |
66: |
exprList.GetExpressions(4).operatorName = "__none__" |
66: |
exprList.GetExpressions(4).operatorName = "__none__" |
67: |
exprList.GetExpressions(4).meshName = "" |
67: |
exprList.GetExpressions(4).meshName = "" |
68: |
exprList.GetExpressions(4).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
68: |
exprList.GetExpressions(4).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
69: |
exprList.GetExpressions(4).autoExpression = 1 |
69: |
exprList.GetExpressions(4).autoExpression = 1 |
70: |
exprList.GetExpressions(5).name = "Vorticity_magnitude" |
70: |
exprList.GetExpressions(5).name = "Vorticity_magnitude" |
71: |
exprList.GetExpressions(5).definition = "magnitude(<Vorticity>)" |
71: |
exprList.GetExpressions(5).definition = "magnitude(<Vorticity>)" |
72: |
exprList.GetExpressions(5).hidden = 0 |
72: |
exprList.GetExpressions(5).hidden = 0 |
73: |
exprList.GetExpressions(5).type = exprList.GetExpressions(5).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
73: |
exprList.GetExpressions(5).type = exprList.GetExpressions(5).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
74: |
exprList.GetExpressions(5).fromDB = 1 |
74: |
exprList.GetExpressions(5).fromDB = 1 |
75: |
exprList.GetExpressions(5).fromOperator = 0 |
75: |
exprList.GetExpressions(5).fromOperator = 0 |
76: |
exprList.GetExpressions(5).operatorName = "__none__" |
76: |
exprList.GetExpressions(5).operatorName = "__none__" |
77: |
exprList.GetExpressions(5).meshName = "" |
77: |
exprList.GetExpressions(5).meshName = "" |
78: |
exprList.GetExpressions(5).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
78: |
exprList.GetExpressions(5).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
79: |
exprList.GetExpressions(5).autoExpression = 1 |
79: |
exprList.GetExpressions(5).autoExpression = 1 |
80: |
exprList.GetExpressions(6).name = "Momentum_magnitude" |
80: |
exprList.GetExpressions(6).name = "Momentum_magnitude" |
81: |
exprList.GetExpressions(6).definition = "magnitude(<Momentum>)" |
81: |
exprList.GetExpressions(6).definition = "magnitude(<Momentum>)" |
82: |
exprList.GetExpressions(6).hidden = 0 |
82: |
exprList.GetExpressions(6).hidden = 0 |
83: |
exprList.GetExpressions(6).type = exprList.GetExpressions(6).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
83: |
exprList.GetExpressions(6).type = exprList.GetExpressions(6).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
84: |
exprList.GetExpressions(6).fromDB = 1 |
84: |
exprList.GetExpressions(6).fromDB = 1 |
85: |
exprList.GetExpressions(6).fromOperator = 0 |
85: |
exprList.GetExpressions(6).fromOperator = 0 |
86: |
exprList.GetExpressions(6).operatorName = "__none__" |
86: |
exprList.GetExpressions(6).operatorName = "__none__" |
87: |
exprList.GetExpressions(6).meshName = "" |
87: |
exprList.GetExpressions(6).meshName = "" |
88: |
exprList.GetExpressions(6).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
88: |
exprList.GetExpressions(6).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
89: |
exprList.GetExpressions(6).autoExpression = 1 |
89: |
exprList.GetExpressions(6).autoExpression = 1 |
90: |
exprList.GetExpressions(7).name = "PressureGradient_magnitude" |
90: |
exprList.GetExpressions(7).name = "PressureGradient_magnitude" |
91: |
exprList.GetExpressions(7).definition = "magnitude(<PressureGradient>)" |
91: |
exprList.GetExpressions(7).definition = "magnitude(<PressureGradient>)" |
92: |
exprList.GetExpressions(7).hidden = 0 |
92: |
exprList.GetExpressions(7).hidden = 0 |
93: |
exprList.GetExpressions(7).type = exprList.GetExpressions(7).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
93: |
exprList.GetExpressions(7).type = exprList.GetExpressions(7).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
94: |
exprList.GetExpressions(7).fromDB = 1 |
94: |
exprList.GetExpressions(7).fromDB = 1 |
95: |
exprList.GetExpressions(7).fromOperator = 0 |
95: |
exprList.GetExpressions(7).fromOperator = 0 |
96: |
exprList.GetExpressions(7).operatorName = "__none__" |
96: |
exprList.GetExpressions(7).operatorName = "__none__" |
97: |
exprList.GetExpressions(7).meshName = "" |
97: |
exprList.GetExpressions(7).meshName = "" |
98: |
exprList.GetExpressions(7).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
98: |
exprList.GetExpressions(7).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
99: |
exprList.GetExpressions(7).autoExpression = 1 |
99: |
exprList.GetExpressions(7).autoExpression = 1 |
100: |
exprList.GetExpressions(8).name = "StrainRate_magnitude" |
100: |
exprList.GetExpressions(8).name = "StrainRate_magnitude" |
101: |
exprList.GetExpressions(8).definition = "magnitude(<StrainRate>)" |
101: |
exprList.GetExpressions(8).definition = "magnitude(<StrainRate>)" |
102: |
exprList.GetExpressions(8).hidden = 0 |
102: |
exprList.GetExpressions(8).hidden = 0 |
103: |
exprList.GetExpressions(8).type = exprList.GetExpressions(8).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
103: |
exprList.GetExpressions(8).type = exprList.GetExpressions(8).ScalarMeshVar # Unknown, ScalarMeshVar, VectorMeshVar, TensorMeshVar, SymmetricTensorMeshVar, ArrayMeshVar, CurveMeshVar, Mesh, Material, Species |
104: |
exprList.GetExpressions(8).fromDB = 1 |
104: |
exprList.GetExpressions(8).fromDB = 1 |
105: |
exprList.GetExpressions(8).fromOperator = 0 |
105: |
exprList.GetExpressions(8).fromOperator = 0 |
106: |
exprList.GetExpressions(8).operatorName = "__none__" |
106: |
exprList.GetExpressions(8).operatorName = "__none__" |
107: |
exprList.GetExpressions(8).meshName = "" |
107: |
exprList.GetExpressions(8).meshName = "" |
108: |
exprList.GetExpressions(8).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
108: |
exprList.GetExpressions(8).dbName = "VISIT_TOP_DIR/data/PLOT3D_test_data/BluntFin/blunt_timeseries.vp3d" |
109: |
exprList.GetExpressions(8).autoExpression = 1 |
109: |
exprList.GetExpressions(8).autoExpression = 1 |
110: |
GetMeshes(0).name = "mesh" |
110: |
GetMeshes(0).name = "mesh" |
111: |
GetMeshes(0).originalName = "mesh" |
111: |
GetMeshes(0).originalName = "mesh" |
112: |
GetMeshes(0).validVariable = 1 |
112: |
GetMeshes(0).validVariable = 1 |
113: |
GetMeshes(0).meshType = GetMeshes(0).AVT_CURVILINEAR_MESH # AVT_RECTILINEAR_MESH, AVT_CURVILINEAR_MESH, AVT_UNSTRUCTURED_MESH, AVT_POINT_MESH, AVT_SURFACE_MESH, AVT_CSG_MESH, AVT_AMR_MESH, AVT_UNKNOWN_MESH |
113: |
GetMeshes(0).meshType = GetMeshes(0).AVT_CURVILINEAR_MESH # AVT_RECTILINEAR_MESH, AVT_CURVILINEAR_MESH, AVT_UNSTRUCTURED_MESH, AVT_POINT_MESH, AVT_SURFACE_MESH, AVT_CSG_MESH, AVT_AMR_MESH, AVT_UNKNOWN_MESH |
114: |
GetMeshes(0).meshCoordType = GetMeshes(0).AVT_XY # AVT_XY, AVT_RZ, AVT_ZR |
114: |
GetMeshes(0).meshCoordType = GetMeshes(0).AVT_XY # AVT_XY, AVT_RZ, AVT_ZR |
115: |
GetMeshes(0).cellOrigin = 0 |
115: |
GetMeshes(0).cellOrigin = 0 |
116: |
GetMeshes(0).spatialDimension = 3 |
116: |
GetMeshes(0).spatialDimension = 3 |
117: |
GetMeshes(0).hasLogicalBounds = 0 |
117: |
GetMeshes(0).hasLogicalBounds = 0 |
118: |
GetMeshes(0).logicalBounds = (0, 0, 0) |
118: |
GetMeshes(0).logicalBounds = (0, 0, 0) |
119: |
GetMeshes(0).hasNumberCells = 0 |
119: |
GetMeshes(0).hasNumberCells = 0 |
120: |
GetMeshes(0).numberCells = 0 |
120: |
GetMeshes(0).numberCells = 0 |
121: |
GetMeshes(0).topologicalDimension = 3 |
121: |
GetMeshes(0).topologicalDimension = 3 |
122: |
GetMeshes(0).xUnits = "" |
122: |
GetMeshes(0).xUnits = "" |
123: |
GetMeshes(0).yUnits = "" |
123: |
GetMeshes(0).yUnits = "" |
124: |
GetMeshes(0).zUnits = "" |
124: |
GetMeshes(0).zUnits = "" |
125: |
GetMeshes(0).xLabel = "X-Axis" |
125: |
GetMeshes(0).xLabel = "X-Axis" |
126: |
GetMeshes(0).yLabel = "Y-Axis" |
126: |
GetMeshes(0).yLabel = "Y-Axis" |
127: |
GetMeshes(0).zLabel = "Z-Axis" |
127: |
GetMeshes(0).zLabel = "Z-Axis" |
128: |
GetMeshes(0).hasSpatialExtents = 0 |
128: |
GetMeshes(0).hasSpatialExtents = 0 |
129: |
GetMeshes(0).minSpatialExtents = (0, 0, 0) |
129: |
GetMeshes(0).minSpatialExtents = (0, 0, 0) |
130: |
GetMeshes(0).maxSpatialExtents = (0, 0, 0) |
130: |
GetMeshes(0).maxSpatialExtents = (0, 0, 0) |
131: |
GetMeshes(0).numBlocks = 1 |
131: |
GetMeshes(0).numBlocks = 1 |
132: |
GetMeshes(0).blockOrigin = 0 |
132: |
GetMeshes(0).blockOrigin = 0 |
133: |
GetMeshes(0).blockPieceName = "domain" |
133: |
GetMeshes(0).blockPieceName = "domain" |
134: |
GetMeshes(0).blockTitle = "domains" |
134: |
GetMeshes(0).blockTitle = "domains" |
135: |
GetMeshes(0).blockNames = () |
135: |
GetMeshes(0).blockNames = () |
136: |
GetMeshes(0).blockNameScheme.namescheme = "" |
136: |
GetMeshes(0).blockNameScheme.namescheme = "" |
137: |
GetMeshes(0).blockNameScheme.externalArrayNames = () |
137: |
GetMeshes(0).blockNameScheme.externalArrayNames = () |
138: |
GetMeshes(0).blockNameScheme.externalArrayOffsets = () |
138: |
GetMeshes(0).blockNameScheme.externalArrayOffsets = () |
139: |
GetMeshes(0).blockNameScheme.externalArrayData = () |
139: |
GetMeshes(0).blockNameScheme.externalArrayData = () |
140: |
GetMeshes(0).blockNameScheme.allExplicitNames = () |
140: |
GetMeshes(0).blockNameScheme.allExplicitNames = () |
141: |
GetMeshes(0).blockNameScheme.explicitIds = () |
141: |
GetMeshes(0).blockNameScheme.explicitIds = () |
142: |
GetMeshes(0).blockNameScheme.explicitNames = () |
142: |
GetMeshes(0).blockNameScheme.explicitNames = () |
143: |
GetMeshes(0).numGroups = 0 |
143: |
GetMeshes(0).numGroups = 0 |
144: |
GetMeshes(0).groupOrigin = 0 |
144: |
GetMeshes(0).groupOrigin = 0 |
145: |
GetMeshes(0).groupPieceName = "group" |
145: |
GetMeshes(0).groupPieceName = "group" |
146: |
GetMeshes(0).groupTitle = "groups" |
146: |
GetMeshes(0).groupTitle = "groups" |
147: |
GetMeshes(0).groupNames = () |
147: |
GetMeshes(0).groupNames = () |
148: |
GetMeshes(0).groupIds = () |
148: |
GetMeshes(0).groupIds = () |
149: |
GetMeshes(0).groupIdsBasedOnRange = () |
149: |
GetMeshes(0).groupIdsBasedOnRange = () |
150: |
GetMeshes(0).disjointElements = 0 |
150: |
GetMeshes(0).disjointElements = 0 |
151: |
GetMeshes(0).containsGhostZones = GetMeshes(0).AVT_MAYBE_GHOSTS # AVT_NO_GHOSTS, AVT_HAS_GHOSTS, AVT_CREATED_GHOSTS, AVT_MAYBE_GHOSTS |
151: |
GetMeshes(0).containsGhostZones = GetMeshes(0).AVT_MAYBE_GHOSTS # AVT_NO_GHOSTS, AVT_HAS_GHOSTS, AVT_CREATED_GHOSTS, AVT_MAYBE_GHOSTS |
152: |
GetMeshes(0).containsOriginalCells = 0 |
152: |
GetMeshes(0).containsOriginalCells = 0 |
153: |
GetMeshes(0).containsOriginalNodes = 0 |
153: |
GetMeshes(0).containsOriginalNodes = 0 |
154: |
GetMeshes(0).containsGlobalNodeIds = 0 |
154: |
GetMeshes(0).containsGlobalNodeIds = 0 |
155: |
GetMeshes(0).containsGlobalZoneIds = 0 |
155: |
GetMeshes(0).containsGlobalZoneIds = 0 |
156: |
GetMeshes(0).loadBalanceScheme = GetMeshes(0).LOAD_BALANCE_UNKNOWN # LOAD_BALANCE_UNKNOWN, LOAD_BALANCE_CONTIGUOUS_BLOCKS_TOGETHER, LOAD_BALANCE_STRIDE_ACROSS_BLOCKS, LOAD_BALANCE_RANDOM_ASSIGNMENT, LOAD_BALANCE_DBPLUGIN_DYNAMIC, LOAD_BALANCE_RESTRICTED, LOAD_BALANCE_ABSOLUTE |
156: |
GetMeshes(0).loadBalanceScheme = GetMeshes(0).LOAD_BALANCE_UNKNOWN # LOAD_BALANCE_UNKNOWN, LOAD_BALANCE_CONTIGUOUS_BLOCKS_TOGETHER, LOAD_BALANCE_STRIDE_ACROSS_BLOCKS, LOAD_BALANCE_RANDOM_ASSIGNMENT, LOAD_BALANCE_DBPLUGIN_DYNAMIC, LOAD_BALANCE_RESTRICTED, LOAD_BALANCE_ABSOLUTE |
157: |
GetMeshes(0).nodesAreCritical = 0 |
157: |
GetMeshes(0).nodesAreCritical = 0 |
158: |
GetMeshes(0).unitCellVectors = (1, 0, 0, 0, 1, 0, 0, 0, 1) |
158: |
GetMeshes(0).unitCellVectors = (1, 0, 0, 0, 1, 0, 0, 0, 1) |
159: |
GetMeshes(0).unitCellOrigin = (0, 0, 0) |
159: |
GetMeshes(0).unitCellOrigin = (0, 0, 0) |
160: |
GetMeshes(0).rectilinearGridHasTransform = 0 |
160: |
GetMeshes(0).rectilinearGridHasTransform = 0 |
161: |
GetMeshes(0).rectilinearGridTransform = (1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1) |
161: |
GetMeshes(0).rectilinearGridTransform = (1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1) |
162: |
GetMeshes(0).nodeOrigin = 0 |
162: |
GetMeshes(0).nodeOrigin = 0 |
163: |
GetMeshes(0).containsExteriorBoundaryGhosts = 0 |
163: |
GetMeshes(0).containsExteriorBoundaryGhosts = 0 |
164: |
GetMeshes(0).hideFromGUI = 0 |
164: |
GetMeshes(0).hideFromGUI = 0 |
165: |
GetMeshes(0).LODs = 1 |
165: |
GetMeshes(0).LODs = 1 |
166: |
GetMeshes(0).presentGhostZoneTypes = 0 |
166: |
GetMeshes(0).presentGhostZoneTypes = 0 |
167: |
GetMeshes(0).zonesWereSplit = 0 |
167: |
GetMeshes(0).zonesWereSplit = 0 |
168: |
#subsets does not contain any avtSubsetsMetaData objects. |
168: |
#subsets does not contain any avtSubsetsMetaData objects. |
169: |
GetScalars(0).name = "Density" |
169: |
GetScalars(0).name = "Density" |
170: |
GetScalars(0).originalName = "Density" |
170: |
GetScalars(0).originalName = "Density" |
171: |
GetScalars(0).meshName = "mesh" |
171: |
GetScalars(0).meshName = "mesh" |
172: |
GetScalars(0).validVariable = 1 |
172: |
GetScalars(0).validVariable = 1 |
173: |
GetScalars(0).hideFromGUI = 0 |
173: |
GetScalars(0).hideFromGUI = 0 |
174: |
GetScalars(0).centering = GetScalars(0).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
174: |
GetScalars(0).centering = GetScalars(0).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
175: |
GetScalars(0).hasUnits = 0 |
175: |
GetScalars(0).hasUnits = 0 |
176: |
GetScalars(0).units = "" |
176: |
GetScalars(0).units = "" |
177: |
GetScalars(0).hasDataExtents = 0 |
177: |
GetScalars(0).hasDataExtents = 0 |
178: |
GetScalars(0).minDataExtents = 0 |
178: |
GetScalars(0).minDataExtents = 0 |
179: |
GetScalars(0).maxDataExtents = 0 |
179: |
GetScalars(0).maxDataExtents = 0 |
180: |
GetScalars(0).matRestricted = () |
180: |
GetScalars(0).matRestricted = () |
181: |
GetScalars(0).treatAsASCII = 0 |
181: |
GetScalars(0).treatAsASCII = 0 |
182: |
GetScalars(0).enumerationType = GetScalars(0).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
182: |
GetScalars(0).enumerationType = GetScalars(0).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
183: |
GetScalars(0).enumNames = () |
183: |
GetScalars(0).enumNames = () |
184: |
GetScalars(0).enumRanges = () |
184: |
GetScalars(0).enumRanges = () |
185: |
GetScalars(0).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
185: |
GetScalars(0).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
186: |
GetScalars(0).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
186: |
GetScalars(0).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
187: |
GetScalars(0).enumPartialCellMode = GetScalars(0).Exclude # Include, Exclude, Dissect |
187: |
GetScalars(0).enumPartialCellMode = GetScalars(0).Exclude # Include, Exclude, Dissect |
188: |
GetScalars(0).enumGraphEdges = () |
188: |
GetScalars(0).enumGraphEdges = () |
189: |
GetScalars(0).enumGraphEdgeNames = () |
189: |
GetScalars(0).enumGraphEdgeNames = () |
190: |
GetScalars(0).enumGraphEdgeNameIndexs = () |
190: |
GetScalars(0).enumGraphEdgeNameIndexs = () |
191: |
GetScalars(0).enumNChooseRN = 0 |
191: |
GetScalars(0).enumNChooseRN = 0 |
192: |
GetScalars(0).enumNChooseRMaxR = 0 |
192: |
GetScalars(0).enumNChooseRMaxR = 0 |
193: |
GetScalars(0).missingDataType = GetScalars(0).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
193: |
GetScalars(0).missingDataType = GetScalars(0).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
194: |
GetScalars(0).missingData = (0, 0) |
194: |
GetScalars(0).missingData = (0, 0) |
195: |
GetScalars(1).name = "Pressure" |
195: |
GetScalars(1).name = "Pressure" |
196: |
GetScalars(1).originalName = "Pressure" |
196: |
GetScalars(1).originalName = "Pressure" |
197: |
GetScalars(1).meshName = "mesh" |
197: |
GetScalars(1).meshName = "mesh" |
198: |
GetScalars(1).validVariable = 1 |
198: |
GetScalars(1).validVariable = 1 |
199: |
GetScalars(1).hideFromGUI = 0 |
199: |
GetScalars(1).hideFromGUI = 0 |
200: |
GetScalars(1).centering = GetScalars(1).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
200: |
GetScalars(1).centering = GetScalars(1).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
201: |
GetScalars(1).hasUnits = 0 |
201: |
GetScalars(1).hasUnits = 0 |
202: |
GetScalars(1).units = "" |
202: |
GetScalars(1).units = "" |
203: |
GetScalars(1).hasDataExtents = 0 |
203: |
GetScalars(1).hasDataExtents = 0 |
204: |
GetScalars(1).minDataExtents = 0 |
204: |
GetScalars(1).minDataExtents = 0 |
205: |
GetScalars(1).maxDataExtents = 0 |
205: |
GetScalars(1).maxDataExtents = 0 |
206: |
GetScalars(1).matRestricted = () |
206: |
GetScalars(1).matRestricted = () |
207: |
GetScalars(1).treatAsASCII = 0 |
207: |
GetScalars(1).treatAsASCII = 0 |
208: |
GetScalars(1).enumerationType = GetScalars(1).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
208: |
GetScalars(1).enumerationType = GetScalars(1).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
209: |
GetScalars(1).enumNames = () |
209: |
GetScalars(1).enumNames = () |
210: |
GetScalars(1).enumRanges = () |
210: |
GetScalars(1).enumRanges = () |
211: |
GetScalars(1).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
211: |
GetScalars(1).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
212: |
GetScalars(1).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
212: |
GetScalars(1).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
213: |
GetScalars(1).enumPartialCellMode = GetScalars(1).Exclude # Include, Exclude, Dissect |
213: |
GetScalars(1).enumPartialCellMode = GetScalars(1).Exclude # Include, Exclude, Dissect |
214: |
GetScalars(1).enumGraphEdges = () |
214: |
GetScalars(1).enumGraphEdges = () |
215: |
GetScalars(1).enumGraphEdgeNames = () |
215: |
GetScalars(1).enumGraphEdgeNames = () |
216: |
GetScalars(1).enumGraphEdgeNameIndexs = () |
216: |
GetScalars(1).enumGraphEdgeNameIndexs = () |
217: |
GetScalars(1).enumNChooseRN = 0 |
217: |
GetScalars(1).enumNChooseRN = 0 |
218: |
GetScalars(1).enumNChooseRMaxR = 0 |
218: |
GetScalars(1).enumNChooseRMaxR = 0 |
219: |
GetScalars(1).missingDataType = GetScalars(1).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
219: |
GetScalars(1).missingDataType = GetScalars(1).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
220: |
GetScalars(1).missingData = (0, 0) |
220: |
GetScalars(1).missingData = (0, 0) |
221: |
GetScalars(2).name = "Temperature" |
221: |
GetScalars(2).name = "Temperature" |
222: |
GetScalars(2).originalName = "Temperature" |
222: |
GetScalars(2).originalName = "Temperature" |
223: |
GetScalars(2).meshName = "mesh" |
223: |
GetScalars(2).meshName = "mesh" |
224: |
GetScalars(2).validVariable = 1 |
224: |
GetScalars(2).validVariable = 1 |
225: |
GetScalars(2).hideFromGUI = 0 |
225: |
GetScalars(2).hideFromGUI = 0 |
226: |
GetScalars(2).centering = GetScalars(2).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
226: |
GetScalars(2).centering = GetScalars(2).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
227: |
GetScalars(2).hasUnits = 0 |
227: |
GetScalars(2).hasUnits = 0 |
228: |
GetScalars(2).units = "" |
228: |
GetScalars(2).units = "" |
229: |
GetScalars(2).hasDataExtents = 0 |
229: |
GetScalars(2).hasDataExtents = 0 |
230: |
GetScalars(2).minDataExtents = 0 |
230: |
GetScalars(2).minDataExtents = 0 |
231: |
GetScalars(2).maxDataExtents = 0 |
231: |
GetScalars(2).maxDataExtents = 0 |
232: |
GetScalars(2).matRestricted = () |
232: |
GetScalars(2).matRestricted = () |
233: |
GetScalars(2).treatAsASCII = 0 |
233: |
GetScalars(2).treatAsASCII = 0 |
234: |
GetScalars(2).enumerationType = GetScalars(2).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
234: |
GetScalars(2).enumerationType = GetScalars(2).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
235: |
GetScalars(2).enumNames = () |
235: |
GetScalars(2).enumNames = () |
236: |
GetScalars(2).enumRanges = () |
236: |
GetScalars(2).enumRanges = () |
237: |
GetScalars(2).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
237: |
GetScalars(2).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
238: |
GetScalars(2).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
238: |
GetScalars(2).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
239: |
GetScalars(2).enumPartialCellMode = GetScalars(2).Exclude # Include, Exclude, Dissect |
239: |
GetScalars(2).enumPartialCellMode = GetScalars(2).Exclude # Include, Exclude, Dissect |
240: |
GetScalars(2).enumGraphEdges = () |
240: |
GetScalars(2).enumGraphEdges = () |
241: |
GetScalars(2).enumGraphEdgeNames = () |
241: |
GetScalars(2).enumGraphEdgeNames = () |
242: |
GetScalars(2).enumGraphEdgeNameIndexs = () |
242: |
GetScalars(2).enumGraphEdgeNameIndexs = () |
243: |
GetScalars(2).enumNChooseRN = 0 |
243: |
GetScalars(2).enumNChooseRN = 0 |
244: |
GetScalars(2).enumNChooseRMaxR = 0 |
244: |
GetScalars(2).enumNChooseRMaxR = 0 |
245: |
GetScalars(2).missingDataType = GetScalars(2).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
245: |
GetScalars(2).missingDataType = GetScalars(2).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
246: |
GetScalars(2).missingData = (0, 0) |
246: |
GetScalars(2).missingData = (0, 0) |
247: |
GetScalars(3).name = "Enthalpy" |
247: |
GetScalars(3).name = "Enthalpy" |
248: |
GetScalars(3).originalName = "Enthalpy" |
248: |
GetScalars(3).originalName = "Enthalpy" |
249: |
GetScalars(3).meshName = "mesh" |
249: |
GetScalars(3).meshName = "mesh" |
250: |
GetScalars(3).validVariable = 1 |
250: |
GetScalars(3).validVariable = 1 |
251: |
GetScalars(3).hideFromGUI = 0 |
251: |
GetScalars(3).hideFromGUI = 0 |
252: |
GetScalars(3).centering = GetScalars(3).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
252: |
GetScalars(3).centering = GetScalars(3).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
253: |
GetScalars(3).hasUnits = 0 |
253: |
GetScalars(3).hasUnits = 0 |
254: |
GetScalars(3).units = "" |
254: |
GetScalars(3).units = "" |
255: |
GetScalars(3).hasDataExtents = 0 |
255: |
GetScalars(3).hasDataExtents = 0 |
256: |
GetScalars(3).minDataExtents = 0 |
256: |
GetScalars(3).minDataExtents = 0 |
257: |
GetScalars(3).maxDataExtents = 0 |
257: |
GetScalars(3).maxDataExtents = 0 |
258: |
GetScalars(3).matRestricted = () |
258: |
GetScalars(3).matRestricted = () |
259: |
GetScalars(3).treatAsASCII = 0 |
259: |
GetScalars(3).treatAsASCII = 0 |
260: |
GetScalars(3).enumerationType = GetScalars(3).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
260: |
GetScalars(3).enumerationType = GetScalars(3).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
261: |
GetScalars(3).enumNames = () |
261: |
GetScalars(3).enumNames = () |
262: |
GetScalars(3).enumRanges = () |
262: |
GetScalars(3).enumRanges = () |
263: |
GetScalars(3).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
263: |
GetScalars(3).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
264: |
GetScalars(3).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
264: |
GetScalars(3).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
265: |
GetScalars(3).enumPartialCellMode = GetScalars(3).Exclude # Include, Exclude, Dissect |
265: |
GetScalars(3).enumPartialCellMode = GetScalars(3).Exclude # Include, Exclude, Dissect |
266: |
GetScalars(3).enumGraphEdges = () |
266: |
GetScalars(3).enumGraphEdges = () |
267: |
GetScalars(3).enumGraphEdgeNames = () |
267: |
GetScalars(3).enumGraphEdgeNames = () |
268: |
GetScalars(3).enumGraphEdgeNameIndexs = () |
268: |
GetScalars(3).enumGraphEdgeNameIndexs = () |
269: |
GetScalars(3).enumNChooseRN = 0 |
269: |
GetScalars(3).enumNChooseRN = 0 |
270: |
GetScalars(3).enumNChooseRMaxR = 0 |
270: |
GetScalars(3).enumNChooseRMaxR = 0 |
271: |
GetScalars(3).missingDataType = GetScalars(3).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
271: |
GetScalars(3).missingDataType = GetScalars(3).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
272: |
GetScalars(3).missingData = (0, 0) |
272: |
GetScalars(3).missingData = (0, 0) |
273: |
GetScalars(4).name = "InternalEnergy" |
273: |
GetScalars(4).name = "InternalEnergy" |
274: |
GetScalars(4).originalName = "InternalEnergy" |
274: |
GetScalars(4).originalName = "InternalEnergy" |
275: |
GetScalars(4).meshName = "mesh" |
275: |
GetScalars(4).meshName = "mesh" |
276: |
GetScalars(4).validVariable = 1 |
276: |
GetScalars(4).validVariable = 1 |
277: |
GetScalars(4).hideFromGUI = 0 |
277: |
GetScalars(4).hideFromGUI = 0 |
278: |
GetScalars(4).centering = GetScalars(4).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
278: |
GetScalars(4).centering = GetScalars(4).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
279: |
GetScalars(4).hasUnits = 0 |
279: |
GetScalars(4).hasUnits = 0 |
280: |
GetScalars(4).units = "" |
280: |
GetScalars(4).units = "" |
281: |
GetScalars(4).hasDataExtents = 0 |
281: |
GetScalars(4).hasDataExtents = 0 |
282: |
GetScalars(4).minDataExtents = 0 |
282: |
GetScalars(4).minDataExtents = 0 |
283: |
GetScalars(4).maxDataExtents = 0 |
283: |
GetScalars(4).maxDataExtents = 0 |
284: |
GetScalars(4).matRestricted = () |
284: |
GetScalars(4).matRestricted = () |
285: |
GetScalars(4).treatAsASCII = 0 |
285: |
GetScalars(4).treatAsASCII = 0 |
286: |
GetScalars(4).enumerationType = GetScalars(4).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
286: |
GetScalars(4).enumerationType = GetScalars(4).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
287: |
GetScalars(4).enumNames = () |
287: |
GetScalars(4).enumNames = () |
288: |
GetScalars(4).enumRanges = () |
288: |
GetScalars(4).enumRanges = () |
289: |
GetScalars(4).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
289: |
GetScalars(4).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
290: |
GetScalars(4).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
290: |
GetScalars(4).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
291: |
GetScalars(4).enumPartialCellMode = GetScalars(4).Exclude # Include, Exclude, Dissect |
291: |
GetScalars(4).enumPartialCellMode = GetScalars(4).Exclude # Include, Exclude, Dissect |
292: |
GetScalars(4).enumGraphEdges = () |
292: |
GetScalars(4).enumGraphEdges = () |
293: |
GetScalars(4).enumGraphEdgeNames = () |
293: |
GetScalars(4).enumGraphEdgeNames = () |
294: |
GetScalars(4).enumGraphEdgeNameIndexs = () |
294: |
GetScalars(4).enumGraphEdgeNameIndexs = () |
295: |
GetScalars(4).enumNChooseRN = 0 |
295: |
GetScalars(4).enumNChooseRN = 0 |
296: |
GetScalars(4).enumNChooseRMaxR = 0 |
296: |
GetScalars(4).enumNChooseRMaxR = 0 |
297: |
GetScalars(4).missingDataType = GetScalars(4).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
297: |
GetScalars(4).missingDataType = GetScalars(4).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
298: |
GetScalars(4).missingData = (0, 0) |
298: |
GetScalars(4).missingData = (0, 0) |
299: |
GetScalars(5).name = "KineticEnergy" |
299: |
GetScalars(5).name = "KineticEnergy" |
300: |
GetScalars(5).originalName = "KineticEnergy" |
300: |
GetScalars(5).originalName = "KineticEnergy" |
301: |
GetScalars(5).meshName = "mesh" |
301: |
GetScalars(5).meshName = "mesh" |
302: |
GetScalars(5).validVariable = 1 |
302: |
GetScalars(5).validVariable = 1 |
303: |
GetScalars(5).hideFromGUI = 0 |
303: |
GetScalars(5).hideFromGUI = 0 |
304: |
GetScalars(5).centering = GetScalars(5).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
304: |
GetScalars(5).centering = GetScalars(5).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
305: |
GetScalars(5).hasUnits = 0 |
305: |
GetScalars(5).hasUnits = 0 |
306: |
GetScalars(5).units = "" |
306: |
GetScalars(5).units = "" |
307: |
GetScalars(5).hasDataExtents = 0 |
307: |
GetScalars(5).hasDataExtents = 0 |
308: |
GetScalars(5).minDataExtents = 0 |
308: |
GetScalars(5).minDataExtents = 0 |
309: |
GetScalars(5).maxDataExtents = 0 |
309: |
GetScalars(5).maxDataExtents = 0 |
310: |
GetScalars(5).matRestricted = () |
310: |
GetScalars(5).matRestricted = () |
311: |
GetScalars(5).treatAsASCII = 0 |
311: |
GetScalars(5).treatAsASCII = 0 |
312: |
GetScalars(5).enumerationType = GetScalars(5).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
312: |
GetScalars(5).enumerationType = GetScalars(5).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
313: |
GetScalars(5).enumNames = () |
313: |
GetScalars(5).enumNames = () |
314: |
GetScalars(5).enumRanges = () |
314: |
GetScalars(5).enumRanges = () |
315: |
GetScalars(5).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
315: |
GetScalars(5).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
316: |
GetScalars(5).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
316: |
GetScalars(5).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
317: |
GetScalars(5).enumPartialCellMode = GetScalars(5).Exclude # Include, Exclude, Dissect |
317: |
GetScalars(5).enumPartialCellMode = GetScalars(5).Exclude # Include, Exclude, Dissect |
318: |
GetScalars(5).enumGraphEdges = () |
318: |
GetScalars(5).enumGraphEdges = () |
319: |
GetScalars(5).enumGraphEdgeNames = () |
319: |
GetScalars(5).enumGraphEdgeNames = () |
320: |
GetScalars(5).enumGraphEdgeNameIndexs = () |
320: |
GetScalars(5).enumGraphEdgeNameIndexs = () |
321: |
GetScalars(5).enumNChooseRN = 0 |
321: |
GetScalars(5).enumNChooseRN = 0 |
322: |
GetScalars(5).enumNChooseRMaxR = 0 |
322: |
GetScalars(5).enumNChooseRMaxR = 0 |
323: |
GetScalars(5).missingDataType = GetScalars(5).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
323: |
GetScalars(5).missingDataType = GetScalars(5).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
324: |
GetScalars(5).missingData = (0, 0) |
324: |
GetScalars(5).missingData = (0, 0) |
325: |
GetScalars(6).name = "StagnationEnergy" |
325: |
GetScalars(6).name = "StagnationEnergy" |
326: |
GetScalars(6).originalName = "StagnationEnergy" |
326: |
GetScalars(6).originalName = "StagnationEnergy" |
327: |
GetScalars(6).meshName = "mesh" |
327: |
GetScalars(6).meshName = "mesh" |
328: |
GetScalars(6).validVariable = 1 |
328: |
GetScalars(6).validVariable = 1 |
329: |
GetScalars(6).hideFromGUI = 0 |
329: |
GetScalars(6).hideFromGUI = 0 |
330: |
GetScalars(6).centering = GetScalars(6).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
330: |
GetScalars(6).centering = GetScalars(6).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
331: |
GetScalars(6).hasUnits = 0 |
331: |
GetScalars(6).hasUnits = 0 |
332: |
GetScalars(6).units = "" |
332: |
GetScalars(6).units = "" |
333: |
GetScalars(6).hasDataExtents = 0 |
333: |
GetScalars(6).hasDataExtents = 0 |
334: |
GetScalars(6).minDataExtents = 0 |
334: |
GetScalars(6).minDataExtents = 0 |
335: |
GetScalars(6).maxDataExtents = 0 |
335: |
GetScalars(6).maxDataExtents = 0 |
336: |
GetScalars(6).matRestricted = () |
336: |
GetScalars(6).matRestricted = () |
337: |
GetScalars(6).treatAsASCII = 0 |
337: |
GetScalars(6).treatAsASCII = 0 |
338: |
GetScalars(6).enumerationType = GetScalars(6).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
338: |
GetScalars(6).enumerationType = GetScalars(6).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
339: |
GetScalars(6).enumNames = () |
339: |
GetScalars(6).enumNames = () |
340: |
GetScalars(6).enumRanges = () |
340: |
GetScalars(6).enumRanges = () |
341: |
GetScalars(6).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
341: |
GetScalars(6).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
342: |
GetScalars(6).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
342: |
GetScalars(6).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
343: |
GetScalars(6).enumPartialCellMode = GetScalars(6).Exclude # Include, Exclude, Dissect |
343: |
GetScalars(6).enumPartialCellMode = GetScalars(6).Exclude # Include, Exclude, Dissect |
344: |
GetScalars(6).enumGraphEdges = () |
344: |
GetScalars(6).enumGraphEdges = () |
345: |
GetScalars(6).enumGraphEdgeNames = () |
345: |
GetScalars(6).enumGraphEdgeNames = () |
346: |
GetScalars(6).enumGraphEdgeNameIndexs = () |
346: |
GetScalars(6).enumGraphEdgeNameIndexs = () |
347: |
GetScalars(6).enumNChooseRN = 0 |
347: |
GetScalars(6).enumNChooseRN = 0 |
348: |
GetScalars(6).enumNChooseRMaxR = 0 |
348: |
GetScalars(6).enumNChooseRMaxR = 0 |
349: |
GetScalars(6).missingDataType = GetScalars(6).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
349: |
GetScalars(6).missingDataType = GetScalars(6).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
350: |
GetScalars(6).missingData = (0, 0) |
350: |
GetScalars(6).missingData = (0, 0) |
351: |
GetScalars(7).name = "Entropy" |
351: |
GetScalars(7).name = "Entropy" |
352: |
GetScalars(7).originalName = "Entropy" |
352: |
GetScalars(7).originalName = "Entropy" |
353: |
GetScalars(7).meshName = "mesh" |
353: |
GetScalars(7).meshName = "mesh" |
354: |
GetScalars(7).validVariable = 1 |
354: |
GetScalars(7).validVariable = 1 |
355: |
GetScalars(7).hideFromGUI = 0 |
355: |
GetScalars(7).hideFromGUI = 0 |
356: |
GetScalars(7).centering = GetScalars(7).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
356: |
GetScalars(7).centering = GetScalars(7).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
357: |
GetScalars(7).hasUnits = 0 |
357: |
GetScalars(7).hasUnits = 0 |
358: |
GetScalars(7).units = "" |
358: |
GetScalars(7).units = "" |
359: |
GetScalars(7).hasDataExtents = 0 |
359: |
GetScalars(7).hasDataExtents = 0 |
360: |
GetScalars(7).minDataExtents = 0 |
360: |
GetScalars(7).minDataExtents = 0 |
361: |
GetScalars(7).maxDataExtents = 0 |
361: |
GetScalars(7).maxDataExtents = 0 |
362: |
GetScalars(7).matRestricted = () |
362: |
GetScalars(7).matRestricted = () |
363: |
GetScalars(7).treatAsASCII = 0 |
363: |
GetScalars(7).treatAsASCII = 0 |
364: |
GetScalars(7).enumerationType = GetScalars(7).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
364: |
GetScalars(7).enumerationType = GetScalars(7).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
365: |
GetScalars(7).enumNames = () |
365: |
GetScalars(7).enumNames = () |
366: |
GetScalars(7).enumRanges = () |
366: |
GetScalars(7).enumRanges = () |
367: |
GetScalars(7).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
367: |
GetScalars(7).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
368: |
GetScalars(7).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
368: |
GetScalars(7).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
369: |
GetScalars(7).enumPartialCellMode = GetScalars(7).Exclude # Include, Exclude, Dissect |
369: |
GetScalars(7).enumPartialCellMode = GetScalars(7).Exclude # Include, Exclude, Dissect |
370: |
GetScalars(7).enumGraphEdges = () |
370: |
GetScalars(7).enumGraphEdges = () |
371: |
GetScalars(7).enumGraphEdgeNames = () |
371: |
GetScalars(7).enumGraphEdgeNames = () |
372: |
GetScalars(7).enumGraphEdgeNameIndexs = () |
372: |
GetScalars(7).enumGraphEdgeNameIndexs = () |
373: |
GetScalars(7).enumNChooseRN = 0 |
373: |
GetScalars(7).enumNChooseRN = 0 |
374: |
GetScalars(7).enumNChooseRMaxR = 0 |
374: |
GetScalars(7).enumNChooseRMaxR = 0 |
375: |
GetScalars(7).missingDataType = GetScalars(7).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
375: |
GetScalars(7).missingDataType = GetScalars(7).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
376: |
GetScalars(7).missingData = (0, 0) |
376: |
GetScalars(7).missingData = (0, 0) |
377: |
GetScalars(8).name = "Swirl" |
377: |
GetScalars(8).name = "Swirl" |
378: |
GetScalars(8).originalName = "Swirl" |
378: |
GetScalars(8).originalName = "Swirl" |
379: |
GetScalars(8).meshName = "mesh" |
379: |
GetScalars(8).meshName = "mesh" |
380: |
GetScalars(8).validVariable = 1 |
380: |
GetScalars(8).validVariable = 1 |
381: |
GetScalars(8).hideFromGUI = 0 |
381: |
GetScalars(8).hideFromGUI = 0 |
382: |
GetScalars(8).centering = GetScalars(8).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
382: |
GetScalars(8).centering = GetScalars(8).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
383: |
GetScalars(8).hasUnits = 0 |
383: |
GetScalars(8).hasUnits = 0 |
384: |
GetScalars(8).units = "" |
384: |
GetScalars(8).units = "" |
385: |
GetScalars(8).hasDataExtents = 0 |
385: |
GetScalars(8).hasDataExtents = 0 |
386: |
GetScalars(8).minDataExtents = 0 |
386: |
GetScalars(8).minDataExtents = 0 |
387: |
GetScalars(8).maxDataExtents = 0 |
387: |
GetScalars(8).maxDataExtents = 0 |
388: |
GetScalars(8).matRestricted = () |
388: |
GetScalars(8).matRestricted = () |
389: |
GetScalars(8).treatAsASCII = 0 |
389: |
GetScalars(8).treatAsASCII = 0 |
390: |
GetScalars(8).enumerationType = GetScalars(8).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
390: |
GetScalars(8).enumerationType = GetScalars(8).NONE # NONE, ByValue, ByRange, ByBitMask, ByNChooseR |
391: |
GetScalars(8).enumNames = () |
391: |
GetScalars(8).enumNames = () |
392: |
GetScalars(8).enumRanges = () |
392: |
GetScalars(8).enumRanges = () |
393: |
GetScalars(8).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
393: |
GetScalars(8).enumAlwaysExclude = (1.79769e+308, -1.79769e+308) |
394: |
GetScalars(8).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
394: |
GetScalars(8).enumAlwaysInclude = (1.79769e+308, -1.79769e+308) |
395: |
GetScalars(8).enumPartialCellMode = GetScalars(8).Exclude # Include, Exclude, Dissect |
395: |
GetScalars(8).enumPartialCellMode = GetScalars(8).Exclude # Include, Exclude, Dissect |
396: |
GetScalars(8).enumGraphEdges = () |
396: |
GetScalars(8).enumGraphEdges = () |
397: |
GetScalars(8).enumGraphEdgeNames = () |
397: |
GetScalars(8).enumGraphEdgeNames = () |
398: |
GetScalars(8).enumGraphEdgeNameIndexs = () |
398: |
GetScalars(8).enumGraphEdgeNameIndexs = () |
399: |
GetScalars(8).enumNChooseRN = 0 |
399: |
GetScalars(8).enumNChooseRN = 0 |
400: |
GetScalars(8).enumNChooseRMaxR = 0 |
400: |
GetScalars(8).enumNChooseRMaxR = 0 |
401: |
GetScalars(8).missingDataType = GetScalars(8).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
401: |
GetScalars(8).missingDataType = GetScalars(8).MissingData_None # MissingData_None, MissingData_Value, MissingData_Valid_Min, MissingData_Valid_Max, MissingData_Valid_Range |
402: |
GetScalars(8).missingData = (0, 0) |
402: |
GetScalars(8).missingData = (0, 0) |
403: |
GetVectors(0).name = "Velocity" |
403: |
GetVectors(0).name = "Velocity" |
404: |
GetVectors(0).originalName = "Velocity" |
404: |
GetVectors(0).originalName = "Velocity" |
405: |
GetVectors(0).meshName = "mesh" |
405: |
GetVectors(0).meshName = "mesh" |
406: |
GetVectors(0).validVariable = 1 |
406: |
GetVectors(0).validVariable = 1 |
407: |
GetVectors(0).hideFromGUI = 0 |
407: |
GetVectors(0).hideFromGUI = 0 |
408: |
GetVectors(0).centering = GetVectors(0).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
408: |
GetVectors(0).centering = GetVectors(0).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
409: |
GetVectors(0).hasUnits = 0 |
409: |
GetVectors(0).hasUnits = 0 |
410: |
GetVectors(0).units = "" |
410: |
GetVectors(0).units = "" |
411: |
GetVectors(0).hasDataExtents = 0 |
411: |
GetVectors(0).hasDataExtents = 0 |
412: |
GetVectors(0).minDataExtents = 0 |
412: |
GetVectors(0).minDataExtents = 0 |
413: |
GetVectors(0).maxDataExtents = 0 |
413: |
GetVectors(0).maxDataExtents = 0 |
414: |
GetVectors(0).matRestricted = () |
414: |
GetVectors(0).matRestricted = () |
415: |
GetVectors(0).varDim = 3 |
415: |
GetVectors(0).varDim = 3 |
416: |
GetVectors(1).name = "Vorticity" |
416: |
GetVectors(1).name = "Vorticity" |
417: |
GetVectors(1).originalName = "Vorticity" |
417: |
GetVectors(1).originalName = "Vorticity" |
418: |
GetVectors(1).meshName = "mesh" |
418: |
GetVectors(1).meshName = "mesh" |
419: |
GetVectors(1).validVariable = 1 |
419: |
GetVectors(1).validVariable = 1 |
420: |
GetVectors(1).hideFromGUI = 0 |
420: |
GetVectors(1).hideFromGUI = 0 |
421: |
GetVectors(1).centering = GetVectors(1).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
421: |
GetVectors(1).centering = GetVectors(1).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
422: |
GetVectors(1).hasUnits = 0 |
422: |
GetVectors(1).hasUnits = 0 |
423: |
GetVectors(1).units = "" |
423: |
GetVectors(1).units = "" |
424: |
GetVectors(1).hasDataExtents = 0 |
424: |
GetVectors(1).hasDataExtents = 0 |
425: |
GetVectors(1).minDataExtents = 0 |
425: |
GetVectors(1).minDataExtents = 0 |
426: |
GetVectors(1).maxDataExtents = 0 |
426: |
GetVectors(1).maxDataExtents = 0 |
427: |
GetVectors(1).matRestricted = () |
427: |
GetVectors(1).matRestricted = () |
428: |
GetVectors(1).varDim = 3 |
428: |
GetVectors(1).varDim = 3 |
429: |
GetVectors(2).name = "Momentum" |
429: |
GetVectors(2).name = "Momentum" |
430: |
GetVectors(2).originalName = "Momentum" |
430: |
GetVectors(2).originalName = "Momentum" |
431: |
GetVectors(2).meshName = "mesh" |
431: |
GetVectors(2).meshName = "mesh" |
432: |
GetVectors(2).validVariable = 1 |
432: |
GetVectors(2).validVariable = 1 |
433: |
GetVectors(2).hideFromGUI = 0 |
433: |
GetVectors(2).hideFromGUI = 0 |
434: |
GetVectors(2).centering = GetVectors(2).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
434: |
GetVectors(2).centering = GetVectors(2).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
435: |
GetVectors(2).hasUnits = 0 |
435: |
GetVectors(2).hasUnits = 0 |
436: |
GetVectors(2).units = "" |
436: |
GetVectors(2).units = "" |
437: |
GetVectors(2).hasDataExtents = 0 |
437: |
GetVectors(2).hasDataExtents = 0 |
438: |
GetVectors(2).minDataExtents = 0 |
438: |
GetVectors(2).minDataExtents = 0 |
439: |
GetVectors(2).maxDataExtents = 0 |
439: |
GetVectors(2).maxDataExtents = 0 |
440: |
GetVectors(2).matRestricted = () |
440: |
GetVectors(2).matRestricted = () |
441: |
GetVectors(2).varDim = 3 |
441: |
GetVectors(2).varDim = 3 |
442: |
GetVectors(3).name = "PressureGradient" |
442: |
GetVectors(3).name = "PressureGradient" |
443: |
GetVectors(3).originalName = "PressureGradient" |
443: |
GetVectors(3).originalName = "PressureGradient" |
444: |
GetVectors(3).meshName = "mesh" |
444: |
GetVectors(3).meshName = "mesh" |
445: |
GetVectors(3).validVariable = 1 |
445: |
GetVectors(3).validVariable = 1 |
446: |
GetVectors(3).hideFromGUI = 0 |
446: |
GetVectors(3).hideFromGUI = 0 |
447: |
GetVectors(3).centering = GetVectors(3).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
447: |
GetVectors(3).centering = GetVectors(3).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
448: |
GetVectors(3).hasUnits = 0 |
448: |
GetVectors(3).hasUnits = 0 |
449: |
GetVectors(3).units = "" |
449: |
GetVectors(3).units = "" |
450: |
GetVectors(3).hasDataExtents = 0 |
450: |
GetVectors(3).hasDataExtents = 0 |
451: |
GetVectors(3).minDataExtents = 0 |
451: |
GetVectors(3).minDataExtents = 0 |
452: |
GetVectors(3).maxDataExtents = 0 |
452: |
GetVectors(3).maxDataExtents = 0 |
453: |
GetVectors(3).matRestricted = () |
453: |
GetVectors(3).matRestricted = () |
454: |
GetVectors(3).varDim = 3 |
454: |
GetVectors(3).varDim = 3 |
455: |
GetVectors(4).name = "StrainRate" |
455: |
GetVectors(4).name = "StrainRate" |
456: |
GetVectors(4).originalName = "StrainRate" |
456: |
GetVectors(4).originalName = "StrainRate" |
457: |
GetVectors(4).meshName = "mesh" |
457: |
GetVectors(4).meshName = "mesh" |
458: |
GetVectors(4).validVariable = 1 |
458: |
GetVectors(4).validVariable = 1 |
459: |
GetVectors(4).hideFromGUI = 0 |
459: |
GetVectors(4).hideFromGUI = 0 |
460: |
GetVectors(4).centering = GetVectors(4).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
460: |
GetVectors(4).centering = GetVectors(4).AVT_NODECENT # AVT_NODECENT, AVT_ZONECENT, AVT_NO_VARIABLE, AVT_UNKNOWN_CENT |
461: |
GetVectors(4).hasUnits = 0 |
461: |
GetVectors(4).hasUnits = 0 |
462: |
GetVectors(4).units = "" |
462: |
GetVectors(4).units = "" |
463: |
GetVectors(4).hasDataExtents = 0 |
463: |
GetVectors(4).hasDataExtents = 0 |
464: |
GetVectors(4).minDataExtents = 0 |
464: |
GetVectors(4).minDataExtents = 0 |
465: |
GetVectors(4).maxDataExtents = 0 |
465: |
GetVectors(4).maxDataExtents = 0 |
466: |
GetVectors(4).matRestricted = () |
466: |
GetVectors(4).matRestricted = () |
467: |
GetVectors(4).varDim = 3 |
467: |
GetVectors(4).varDim = 3 |
468: |
#tensors does not contain any avtTensorMetaData objects. |
468: |
#tensors does not contain any avtTensorMetaData objects. |
469: |
#symmTensors does not contain any avtSymmetricTensorMetaData objects. |
469: |
#symmTensors does not contain any avtSymmetricTensorMetaData objects. |
470: |
#arrays does not contain any avtArrayMetaData objects. |
470: |
#arrays does not contain any avtArrayMetaData objects. |
471: |
#materials does not contain any avtMaterialMetaData objects. |
471: |
#materials does not contain any avtMaterialMetaData objects. |
472: |
#species does not contain any avtSpeciesMetaData objects. |
472: |
#species does not contain any avtSpeciesMetaData objects. |
473: |
#curves does not contain any avtCurveMetaData objects. |
473: |
#curves does not contain any avtCurveMetaData objects. |
474: |
#labels does not contain any avtLabelMetaData objects. |
474: |
#labels does not contain any avtLabelMetaData objects. |
475: |
#defaultPlots does not contain any avtDefaultPlotMetaData objects. |
475: |
#defaultPlots does not contain any avtDefaultPlotMetaData objects. |
476: |
isSimulation = 0 |
476: |
isSimulation = 0 |
477: |
simInfo.host = "" |
477: |
simInfo.host = "" |
478: |
simInfo.port = 0 |
478: |
simInfo.port = 0 |
479: |
simInfo.securityKey = "" |
479: |
simInfo.securityKey = "" |
480: |
simInfo.otherNames = () |
480: |
simInfo.otherNames = () |
481: |
simInfo.otherValues = () |
481: |
simInfo.otherValues = () |
482: |
#genericCommands does not contain any avtSimulationCommandSpecification objects. |
482: |
#genericCommands does not contain any avtSimulationCommandSpecification objects. |
483: |
simInfo.mode = simInfo.Unknown # Unknown, Running, Stopped |
483: |
simInfo.mode = simInfo.Unknown # Unknown, Running, Stopped |
484: |
#customCommands does not contain any avtSimulationCommandSpecification objects. |
484: |
#customCommands does not contain any avtSimulationCommandSpecification objects. |
485: |
simInfo.message = "" |
485: |
simInfo.message = "" |
486: |
suggestedDefaultSILRestriction = () |
486: |
suggestedDefaultSILRestriction = () |
487: |
replacementMask = -65 |
487: |
replacementMask = -65 |