queries/pick.py# ----------------------------------------------------------------------------
# CLASSES: nightly
#
# Test Case: pick.py #
# Tests: queries - Pick
#
# Defect ID: none
#
# Programmer: Kathleen Bonnell
# Date: May 13, 2003
#
# Modifications:
# Kathleen Bonnell, Fri Jun 27 16:03:57 PDT 2003
# Modified PickFilledBoundary (removed MeshPlot) so that test is preformed
# on FilledBoundaryPlot and not MeshPlot.
#
# Kathleen Bonnell, Tue Jul 8 21:17:17 PDT 2003
# Modified PickFilledBoundary to use flip of slice so that it still works
# with recent slice changes.
#
# Kathleen Bonnell, Thu Aug 28 14:34:57 PDT 2003
# Remove compound var name from Subset and FilledBoundary plots.
#
# Kathleen Bonnell, Wed Sep 10 11:36:32 PDT 2003
# Added test for multi-block meshes.
#
# Kathleen Bonnell, Fri Oct 10 17:43:46 PDT 2003
# Added test for surface plots.
#
# Kathleen Bonnell, Fri Oct 24 16:09:33 PDT 2003
# Added test for PC of BigSil, and pickvar = material.
#
# Kathleen Bonnell, Wed Nov 5 14:30:35 PST 2003
# Per VisIt000033891, add another onion peel test, where there is only
# 1 cell, and window is set to use Actual extents.
#
# Kathleen Bonnell, Thu Nov 13 12:07:20 PST 2003
# Use SetOperatorOptions instead of SetDefaultOperatorOption in OnionPeel, so
# that OnionPeel2 will work correctly. Added vars to OnionPeel2.
#
# Kathleen Bonnell, Tue Nov 18 17:23:43 PST 2003
# Added use of PickAtts' useNodeCoords, logicalCoords and logicalZone for
# a few tests.
#
# Kathleen Bonnell, Thu Nov 20 16:29:45 PST 2003
# Added PicSpecMix tests, for species vars, (VisIt '3864).
# Added a 'vel' only test to PickMatFracsThreshold (VisIt '4103).
#
# Kathleen Bonnell, Wed Nov 26 11:26:04 PST 2003
# Added calls to ResetPickLetter after each test, so that each test's
# pick letter starts out with 'A'. This will prevent the necessity of
# updating all pick baselines when modifications are made to only one test.
# Added tests for new pick methods: PickByZone, PickByNode. ('4123)
#
# Kathleen Bonnell, Wed Dec 3 07:51:52 PST 2003
# Added PickCurve tests, for curve plots. (VisIt '3832).
#
# Kathleen Bonnell, Mon Mar 8 15:47:52 PST 2004
# Added more tests to TestSpecMix, to verify that we get same results
# regardless of whether 'species' is the active variable, or some other
# scalar is the active variale.
#
# Kathleen Bonnell, Tue Mar 16 16:26:17 PST 2004
# Added bad variables and expression variable tests to PickMultiBlock,
# from bug '4571.
#
# Kathleen Bonnell, Thu Apr 1 09:21:22 PST 2004
# Added a "Variable by Zone" and "Variable by Node" Query to PickSpecMix
# in order to test that these queries return the same values as their
# Pick counterparts.
#
# Kathleen Bonnell, Tue Apr 20 09:42:30 PDT 2004
# Added PickMultiWindow.
#
# Kathleen Bonnell, Thu Apr 29 07:40:58 PDT 2004
# Slice defaults atts have changed, update accordingly.
#
# Brad Whitlock, Mon May 3 15:31:40 PST 2004
# I added a couple of tests that test how pick works if an engine is closed
# or if one crashes.
#
# Kathleen Bonnell, Tue May 4 14:35:08 PDT 2004
# Changed a couple of screen coordinates for PickBigSilMat that were
# invalid.
#
# Kathleen Bonnell, Wed Jun 2 10:14:58 PDT 2004
# Added tests to Pick2D to tests PickByNode and PickByZone on a dataset
# with ghost zones. Added test to PickSurface, tests various flavors
# of pick to see if they are returning the same info for the same input.
#
# Kathleen Bonnell, Thu Jul 8 16:30:07 PDT 2004
# Added PickedBoundary, to test picking on 2D Boundary plots and
# 3D Sliced-to-2D Boundary plots with unstructured, rectilinear and
# curvilinear data.
#
# Jeremy Meredith, Wed Jul 21 08:59:24 PDT 2004
# Making print output go to stderr.
#
# Kathleen Bonnell, Thu Jul 22 08:35:45 PDT 2004
# Added test of data designated as 'ascii' to Pick2D (using rect2d).
#
# Kathleen Bonnell, Wed Aug 11 09:04:56 PDT 2004
# Added to Pick3DTo2D, a test of data sliced along boundary between zones,
# to verify that picking with all materials ON returns same results as
# with some materials OFF. ('5279)
#
# Brad Whitlock, Wed Aug 25 12:30:45 PDT 2004
# Added TurnMaterialsOn to PickMultiBlock since it was remembering the
# material selection for mulit_rect3d.silo from an earlier pick test.
#
# Kathleen Bonnell, Wed Sep 8 09:36:30 PDT 2004
# Renamed 'WorldPick' to 'Pick' and 'WorldNodePick' to 'NodePick'.
#
# Kathleen Bonnell, Fri Oct 22 16:11:41 PDT 2004
# Added PickVectorPlots.
#
# Kathleen Bonnell, Tue Nov 2 10:16:36 PST 2004
# Added PickPointMeshes.
#
# Kathleen Bonnell, Wed Dec 15 15:38:41 PST 2004
# Added PickGlobalIds.
#
# Kathleen Bonnell, Thu Dec 16 17:16:33 PST 2004
# Added PickByNode and PickByZone to PickGlobalIds.
#
# Kathleen Bonnell, Mon Dec 20 10:49:59 PST 2004
# Removed "Variable by Zone" and "Variable by Node" Query from PickSpecMix
# as they are no longer supported.
#
# Kathleen Bonnell, Thu Feb 3 09:27:22 PST 2005
# Added PickExpressions, testing matvf and mirvf per '5799.
#
# Kathleen Bonnell, Tue Mar 1 13:11:31 PST 2005
# Added couple more tests to PickExpressions, testing Expression that
# has not been plotted, per '5418.
#
# Brad Whitlock, Wed Mar 9 09:15:30 PDT 2005
# Removed deprecated functions.
#
# Kathleen Bonnell, Wed May 11 18:04:12 PDT 2005
# Per ticket '6097, added tests to 'PickGlobalIds' to ensure global ids
# returned correctly for global zone/node picks.
#
# Kathleen Bonnell, Mon May 23 13:41:50 PDT 2005
# Per ticket '6217, added tests to 'PickFilledBoundary' to ensure node
# pick of sliced FB plot returns correct coords.
#
# Kathleen Bonnell, Fri Jun 10 14:38:27 PDT 2005
# Per ticket '6296 -- added tests to PickVectorPlots to ensure that
# pick of vector expression won't causes crash
#
# Kathleen Bonnell, Thu Jun 30 15:39:03 PDT 2005
# Added tests for AMR data.
#
# Kathleen Bonnell, Fri Jul 8 14:12:03 PDT 2005
# Added more tests for AMR data: PickSamrai.
#
# Kathleen Bonnell, Wed Aug 10 17:12:50 PDT 2005
# Added PickIndexSelect.
#
# Kathleen Bonnell, Tue Aug 30 15:19:34 PDT 2005
# Added PickTensors. '6410
#
# Jeremy Meredith, Wed Sep 7 12:06:04 PDT 2005
# Allowed spaces in variable names.
#
# Kathleen Bonnell, Tue May 2 08:38:28 PDT 2006
# Added PickMili ('7144, '7145).
#
# Kathleen Bonnell, Tue Aug 29 09:34:17 PDT 2006
# Added Pickcontour ('7220).
#
# Kathleen Bonnell, Thu Oct 26 14:24:45 PDT 2006
# Added PickBox ('7566).
#
# Jeremy Meredith, Mon Jul 14 11:17:29 EDT 2008
# Allow the sliced vector plot to show all vectors (even ones not from
# from original cells/nodes) to match the old behavior.
#
# Kathleen Bonnell, Wed Jul 15 10:22:54 PDT 2009
# Changed some zone picks to Node picks for PickPointMeshes, should yield
# same results. Added Subset plot test for PickPointMeshes.
#
# Mark C. Miller, Wed Jan 20 07:37:11 PST 2010
# Added ability to swtich between Silo's HDF5 and PDB data.
#
# Cyrus Harrison, Thu Mar 25 09:57:34 PDT 2010
# Added call(s) to DrawPlots() b/c of changes to the default plot state
# behavior when an operator is added.
#
# Kathleen Biagas, Wed Mar 7 19:33:48 PST 2012
# 'displayXXX' attributes have been changed to 'showXXX'.
#
# Kathleen Biagas, Thu Mar 8 13:52:37 PST 2012
# Added test for picking scatter plots.
#
# Matt Larsen, Mon Sep 19 10:20:11 PDT 2016
# Added a test for zone pick highlighting
#
# Kathleen Biagas, Mon Dec 19 15:45:38 PST 2016
# For PickSubset, change plot var to 'domains' as Subset plots shouldn't
# work for materials. Change pick var to 'mat1' to preserve baselines.
#
# Matt Larsen, Wed Sep 6 16:23:12 PST 2017
# Adding tests for pick by label for mili files.
#
# Alister Maguire, Tue Sep 26 14:23:09 PDT 2017
# Added test for pick highlight color.
#
# Alister Maguire, Mon Oct 23 10:34:28 PDT 2017
# Added tests for removing a list of picks.
#
# Alister Maguire, Mon Oct 30 15:54:30 PDT 2017
# Added test for removing a list of labeled picks.
#
# Matt Larsen, Wed Feb 28 08:24:31 PDT 2018
# Turning off all anotations for pick highlight tests
#
# Alister Maguire, Thu Aug 16 10:18:56 PDT 2018
# Added a test for swivel highlight.
#
# Alister Maguire, Mon Aug 20 12:45:25 PDT 2018
# Added a test for node highlight.
#
# Alister Maguire, Tue May 21 13:10:05 PDT 2019
# Updated tests that use mili to adhere to the plugin changes.
#
# Alister Maguire, Thu Sep 12 15:54:36 PDT 2019
# Add test for highlighting a zone picked by global id.
#
# Alister Maguire, Thu Jan 2 15:16:53 PST 2020
# Added test for translated zone highlights.
#
# Mark C. Miller, Mon Jan 11 10:38:03 PST 2021
# Replace Assert-style with TestValue-style tests
#
# Alister Maguire, Fri Jul 16 07:27:44 PDT 2021
# Added a test for Picking an expression variable.
#
# Kathleen Biagas, Wed Feb 16 09:15:45 PST 2022
# Replace use of meshatts 'foregroundFlag' with meshColorSource.
#
# ----------------------------------------------------------------------------
from __future__ import print_function
RequiredDatabasePlugin(("Boxlib2D","SAMRAI","Mili"))
defaultAtts = GetPickAttributes()
def Pick3DTo2D():
# Testing pick on 3d plots projected to 2d via Slice and Cone operators
OpenDatabase(silo_data_path("globe.silo"))
AddPlot("Pseudocolor", "u")
AddOperator("Slice")
slice = SliceAttributes()
slice.SetOriginPoint(0, 0, 0)
slice.SetNormal(1, 0, 0)
slice.SetUpAxis(0, 1, 0)
slice.project2d = 1
SetOperatorOptions(slice)
DrawPlots()
# Create the variable list.
vars = ("default")
# Do some picks.
Pick(128, 107, vars)
s = GetPickOutput()
Pick(200, 207, vars)
s = s + GetPickOutput()
# Test new pick methods
PickByZone(554, vars)
s = s + GetPickOutput()
PickByZone(945, vars)
s = s + GetPickOutput()
# Turn off some materials, and verify we get
# same results
TurnMaterialsOff("1")
Pick(128, 107, vars)
s = s + GetPickOutput()
Pick(200, 207, vars)
s = s + GetPickOutput()
PickByZone(554, vars)
s = s + GetPickOutput()
PickByZone(945, vars)
s = s + GetPickOutput()
TurnMaterialsOn("1")
RemoveLastOperator()
AddOperator("Cone")
DrawPlots()
ResetView()
Pick(165, 170, vars)
s = s + GetPickOutput()
Pick(137, 100, vars)
s = s + GetPickOutput()
# Test new Pick methods.
PickByZone(503, vars)
s = s + GetPickOutput()
PickByZone(596, vars)
s = s + GetPickOutput()
DeleteAllPlots()
# VisIt00005279
# When sliced along boundary between zones,
# pick with all materials returns different output than
# pick with some materials turned off.
OpenDatabase(silo_data_path("multi_rect3d.silo"))
AddPlot("Pseudocolor", "d")
AddOperator("Slice")
slice = SliceAttributes()
slice.axisType = slice.XAxis
#set the slice plane on a boundary between zones
slice.originIntercept = 0.2
slice.project2d = 1
SetOperatorOptions(slice)
DrawPlots()
s = s + "\nPick with all materials turned on:\n"
Pick(80, 60)
s = s + GetPickOutput()
PickByZone(226, 1)
s = s + GetPickOutput()
Pick(185, 160)
s = s + GetPickOutput()
PickByZone(606, 19)
s = s + GetPickOutput()
NodePick(80, 60)
s = s + GetPickOutput()
PickByNode(402, 1)
s = s + GetPickOutput()
NodePick(185, 160)
s = s + GetPickOutput()
PickByNode(853, 19)
s = s + GetPickOutput()
TurnMaterialsOff("2")
s = s + "\nPick with material 2 turned off:\n"
Pick(80, 60)
s = s + GetPickOutput()
PickByZone(226, 1)
s = s + GetPickOutput()
Pick(185, 160)
s = s + GetPickOutput()
PickByZone(606, 19)
s = s + GetPickOutput()
NodePick(80, 60)
s = s + GetPickOutput()
PickByNode(402, 1)
s = s + GetPickOutput()
NodePick(185, 160)
s = s + GetPickOutput()
PickByNode(853, 19)
s = s + GetPickOutput()
TurnMaterialsOn("2")
TestText("Pick3DTo2D", s)
DeleteAllPlots()
ResetPickLetter()
def Pick2D():
OpenDatabase(silo_data_path("ucd2d.silo"))
AddPlot("Pseudocolor", "u")
DrawPlots()
ResetView()
vars = ("d", "p", "u")
Pick(170, 65, vars)
s = GetPickOutput()
Pick(140, 161, vars)
s = s + GetPickOutput()
# Test new pick method
PickByZone(5, vars)
s = s + GetPickOutput()
PickByZone(4, vars)
s = s + GetPickOutput()
DeleteAllPlots()
# Test PickByZone and PickByNode on data with ghost zones.
OpenDatabase(silo_data_path("curv2d.silo"))
AddPlot("Pseudocolor", "d")
DrawPlots()
ResetView()
v = GetView2D()
v.windowCoords = (-0.70073, 0.9927, 1.75365, 2.63085)
v.viewportCoords = (0.2, 0.95, 0.15, 0.95)
SetView2D(v)
vars = ("default")
Pick(177, 90, vars)
s = s + GetPickOutput()
PickByZone(13)
s = s + GetPickOutput()
NodePick(177, 90, vars)
s = s + GetPickOutput()
PickByNode(13)
s = s + GetPickOutput()
ResetView()
Pick(164, 136)
s = s + GetPickOutput()
PickByZone(716)
s = s + GetPickOutput()
NodePick(164, 136)
s = s + GetPickOutput()
PickByNode(744)
s = s + GetPickOutput()
Pick(113, 84)
s = s + GetPickOutput()
PickByZone(360)
s = s + GetPickOutput()
NodePick(113, 84)
s = s + GetPickOutput()
PickByNode(374)
s = s + GetPickOutput()
Pick(218, 65)
s = s + GetPickOutput()
PickByZone(81)
s = s + GetPickOutput()
NodePick(218, 65)
s = s + GetPickOutput()
PickByNode(85)
s = s + GetPickOutput()
DeleteAllPlots()
# bug '5152, ascii data not reported as such.
OpenDatabase(silo_data_path("rect2d.silo"))
AddPlot("Pseudocolor", "ascii")
DrawPlots()
ResetView()
Pick(104, 224)
s = s + GetPickOutput()
Pick(155, 140)
s = s + GetPickOutput()
Pick(234, 278)
s = s + GetPickOutput()
Pick(151, 266)
s = s + GetPickOutput()
Pick(187, 106)
s = s + GetPickOutput()
NodePick(104, 224)
s = s + GetPickOutput()
NodePick(155, 140)
s = s + GetPickOutput()
NodePick(234, 278)
s = s + GetPickOutput()
NodePick(151, 266)
s = s + GetPickOutput()
NodePick(187, 106)
s = s + GetPickOutput()
TestText("Pick2D", s)
DeleteAllPlots()
ResetPickLetter()
def PickOnionPeel():
# Testing pick on 3d plots with OnionPeel operator
OpenDatabase(silo_data_path("multi_ucd3d.silo"))
AddPlot("Pseudocolor", "u")
AddOperator("OnionPeel")
op = OnionPeelAttributes()
op.adjacencyType = 0
op.categoryName = "domains"
op.subsetName = "domain4"
op.index = 15
op.requestedLayer = 0
SetOperatorOptions(op)
DrawPlots()
v = GetView3D()
v.viewNormal = (0.0199972, -0.0176736, 0.999644)
v.focus = (1.05702, 2.19945, 3.66667)
v.viewUp = (-0.0156863, 0.999715, 0.0179886)
v.viewAngle = 30
v.parallelScale = 0.794807
v.nearPlane = -7.9865
v.farPlane = 7.9865
v.perspective = 0
SetView3D(v)
#From defect VisIt00002762, pick shouldn't report repeated vars
vars = ("default", "d", "p", "u", "p", "v")
pa = GetPickAttributes()
pa.showNodePhysicalCoords = 1
SetPickAttributes(pa)
Pick(271, 64, vars)
s = GetPickOutput()
Pick(282, 53, vars)
s = s + GetPickOutput()
PickByZone(15, 4, vars)
s = s + GetPickOutput()
TestText("PickOnionPeel", s)
pa.showNodePhysicalCoords = 0
SetPickAttributes(pa)
DeleteAllPlots()
ResetPickLetter()
def PickSubset():
#Testing Pick's accuracy on a sil-restricted plot.
#All the picks in this test should return zone 30.
#From defect VisIt00003348
OpenDatabase(silo_data_path("globe.silo"))
AddPlot("Subset", "domains")
TurnMaterialsOff()
TurnMaterialsOn("1")
DrawPlots()
v = GetView3D()
v.viewNormal = (-0.997376, 0.0429928, 0.058241)
v.focus = (-0.0906961, 0.0532744, -1.5925)
v.viewUp = (0.0448435, 0.998518, 0.0308499)
v.viewAngle = 30
v.parallelScale = 0.598088
v.nearPlane = -34.641
v.farPlane = 34.641
v.perspective = 0
SetView3D(v)
vars = ("mat1")
Pick(173, 111, vars)
s = GetPickOutput()
Pick(191, 116, vars)
s = s + GetPickOutput()
Pick(294, 125, vars)
s = s + GetPickOutput()
Pick(156, 128, vars)
s = s + GetPickOutput()
Pick(147, 112, vars)
s = s + GetPickOutput()
TestText("PickSubset", s)
TurnMaterialsOn()
DeleteAllPlots()
ResetPickLetter()
def PickMatFracsThreshold():
# Testing pick on 3d plot with Threshold operator, returning
# material var (mat fracs) and vector var.
OpenDatabase(silo_data_path("rect3d.silo"))
AddPlot("Pseudocolor", "p")
thresh = ThresholdAttributes()
thresh.upperBounds = (37.0)
thresh.lowerBounds = (10.0)
SetDefaultOperatorOptions(thresh)
AddOperator("Threshold")
DrawPlots()
v = GetView3D()
v.viewNormal = (0, 0, 1)
v.focus = (0.5, 0.5, 0.5)
v.viewUp = (0, 1, 0)
v.viewAngle = 30
v.parallelScale = 0.181485
v.nearPlane = -1.73205
v.farPlane = 1.73205
v.perspective = 0
SetView3D(v)
pa = GetPickAttributes()
pa.showNodeDomainLogicalCoords = 1
pa.showZoneDomainLogicalCoords = 1
SetPickAttributes(pa)
vars = ("mat1", "vel")
Pick(151, 172, vars)
s = GetPickOutput()
Pick(211, 185, vars)
s = s + GetPickOutput()
Pick(78, 153, vars)
s = s + GetPickOutput()
Pick(150, 124, vars)
s = s + GetPickOutput()
#Test new pick method
PickByZone(21045, vars)
s = s + GetPickOutput()
PickByZone(18647, vars)
s = s + GetPickOutput()
PickByZone(19812, vars)
s = s + GetPickOutput()
PickByZone(20954, vars)
s = s + GetPickOutput()
pa.showNodeDomainLogicalCoords = 0
pa.showZoneDomainLogicalCoords = 0
SetPickAttributes(pa)
# Add a few with only vel as the var
# From bug: VisIt00004103
RemoveLastOperator()
vars = ("vel")
Pick(78, 153, vars)
s = s + GetPickOutput()
Pick(150, 124, vars)
s = s + GetPickOutput()
#Test new pick method
PickByZone(35412, vars)
s = s + GetPickOutput()
PickByZone(35354, vars)
s = s + GetPickOutput()
TestText("PickMatFracsThreshold", s)
DeleteAllPlots()
ResetPickLetter()
def PickReflect():
# Testing pick on plot with Reflect operator.
OpenDatabase(silo_data_path("curv2d.silo"))
AddPlot("Pseudocolor", "u")
AddOperator("Reflect")
DrawPlots()
ResetView()
vars = ("default")
Pick(149, 206, vars)
s = GetPickOutput()
Pick(149, 94, vars)
s = s + GetPickOutput()
NodePick(coord=(0, 3, 0))
s = s + GetPickOutput()
NodePick(coord=(0, -3, 0))
s = s + GetPickOutput()
DeleteAllPlots()
# Try a rectilinear grid
OpenDatabase(silo_data_path("noise.silo"))
AddPlot("Subset", "Mesh")
AddOperator("Reflect")
DrawPlots()
ResetView()
Pick(coord=(-5, 5, 10))
s = s + GetPickOutput()
NodePick(coord=(-5, 5, 10))
s = s + GetPickOutput()
Pick(coord=(-5, -25, 10))
s = s + GetPickOutput()
NodePick(coord=(-5, -25, 10))
s = s + GetPickOutput()
TestText("PickReflect", s)
DeleteAllPlots()
ResetPickLetter()
def PickFilledBoundary():
OpenDatabase(silo_data_path("multi_ucd3d.silo"))
AddPlot("FilledBoundary", "mat1")
AddOperator("Slice")
s= SliceAttributes()
s.originIntercept = 2.89833
s.originType = s.Intercept
s.normal = (0, 1, 0)
s.upAxis = (1, 0, 0)
s.axisType = s.YAxis
s.flip = 1
s.project2d = 1
SetOperatorOptions(s)
v = GetView2D()
v.viewportCoords = (0.2, 0.95, 0.15, 0.95)
v.windowCoords = (7.07307, 8.30598, 2.26402, 2.88047)
SetView2D(v)
DrawPlots()
vars = ("default")
Pick(153, 69, vars)
p = GetPickOutput()
Pick(222, 56, vars)
p += GetPickOutput()
Pick(118, 77, vars)
p += GetPickOutput()
Pick(141, 74, vars)
p += GetPickOutput()
Pick(180, 68, vars)
p += GetPickOutput()
Pick(224, 75, vars)
p += GetPickOutput()
Pick(198, 56, vars)
p += GetPickOutput()
Pick(113, 70, vars)
p += GetPickOutput()
Pick(119, 57, vars)
p += GetPickOutput()
Pick(157, 66, vars)
p += GetPickOutput()
Pick(199, 66, vars)
p += GetPickOutput()
Pick(227, 79, vars)
p += GetPickOutput()
# Test new pick method
PickByZone(320, 17, vars)
p += GetPickOutput()
DeleteAllPlots()
# bug 6217 -- NodePick on Sliced FB returning wrong coords.
# will test with Mesh, OnionPeeled Mesh and FB to verify
# they all return the same nodes/zones and coords.
OpenDatabase(silo_data_path("globe.silo"))
AddPlot("Mesh", "mesh1")
AddPlot("Mesh", "mesh1")
m = MeshAttributes()
m.meshColor = (255, 255, 0, 255)
m.meshColorSource = m.MeshCustom
m.lineWidth = 2
SetPlotOptions(m)
AddOperator("OnionPeel", 0)
op = OnionPeelAttributes()
op.index = 679
SetOperatorOptions(op)
AddPlot("FilledBoundary","mat1")
AddOperator("Slice", 1)
DrawPlots()
ResetView()
SetActivePlots(0)
Pick(247, 188, vars)
p = p + GetPickOutput()
NodePick(247, 188, vars)
p = p + GetPickOutput()
SetActivePlots(1)
Pick(247, 188, vars)
p = p + GetPickOutput()
NodePick(247, 188, vars)
p = p + GetPickOutput()
SetActivePlots(2)
Pick(247, 188, vars)
p = p + GetPickOutput()
NodePick(247, 188, vars)
p = p + GetPickOutput()
TestText("PickFilledBoundary", p)
DeleteAllPlots()
ResetPickLetter()
def PickMultiBlock():
# Testing pick on 3d multi-domain plots
OpenDatabase(silo_data_path("multi_ucd3d.silo"))
AddPlot("Pseudocolor", "u")
DrawPlots()
ResetView()
v = GetView3D()
v.perspective = 1
SetView3D(v)
vars = ("default", "d", "p")
Pick(109, 113, vars)
s = GetPickOutput()
Pick(74, 114, vars)
s = s + GetPickOutput()
Pick(192, 114, vars)
s = s + GetPickOutput()
Pick(230, 114, vars)
s = s + GetPickOutput()
Pick(155, 148, vars)
s = s + GetPickOutput()
Pick(153, 185, vars)
s = s + GetPickOutput()
Pick(106, 149, vars)
s = s + GetPickOutput()
Pick(196, 144, vars)
s = s + GetPickOutput()
Pick(119, 157, vars)
s = s + GetPickOutput()
Pick(180, 160, vars)
s = s + GetPickOutput()
Pick(97, 130, vars)
s = s + GetPickOutput()
Pick(212, 129, vars)
s = s + GetPickOutput()
# Test new pick method
PickByZone(15, 34, vars)
s = s + GetPickOutput()
PickByZone(15, 36, vars)
s = s + GetPickOutput()
PickByZone(75, 25, vars)
s = s + GetPickOutput()
PickByZone(83, 27, vars)
s = s + GetPickOutput()
PickByZone(15, 28, vars)
s = s + GetPickOutput()
PickByZone(4, 30, vars)
s = s + GetPickOutput()
PickByZone(94, 35, vars)
s = s + GetPickOutput()
PickByZone(15, 26, vars)
s = s + GetPickOutput()
PickByZone(25, 32, vars)
s = s + GetPickOutput()
PickByZone(64, 29, vars)
s = s + GetPickOutput()
PickByZone(56, 35, vars)
s = s + GetPickOutput()
PickByZone(51, 26, vars)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("multi_rect3d.silo"))
AddPlot("Mesh", "mesh1")
TurnMaterialsOn()
DrawPlots()
ResetView()
vars = ("default", "u", "d", "p")
Pick(61, 61, vars)
s = s + GetPickOutput()
Pick(61, 188, vars)
s = s + GetPickOutput()
Pick(79, 233, vars)
s = s + GetPickOutput()
Pick(80, 64, vars)
s = s + GetPickOutput()
Pick(99, 120, vars)
s = s + GetPickOutput()
Pick(115, 236, vars)
s = s + GetPickOutput()
Pick(154, 194, vars)
s = s + GetPickOutput()
Pick(155, 150, vars)
s = s + GetPickOutput()
Pick(174, 72, vars)
s = s + GetPickOutput()
Pick(192, 115, vars)
s = s + GetPickOutput()
Pick(229, 235, vars)
s = s + GetPickOutput()
Pick(236, 59, vars)
s = s + GetPickOutput()
Pick(246, 157, vars)
s = s + GetPickOutput()
# Test new pick method
PickByZone(921, 25, vars)
s = s + GetPickOutput()
PickByZone(971, 31, vars)
s = s + GetPickOutput()
PickByZone(964, 34, vars)
s = s + GetPickOutput()
PickByZone(934, 25, vars)
s = s + GetPickOutput()
PickByZone(947, 28, vars)
s = s + GetPickOutput()
PickByZone(969, 34, vars)
s = s + GetPickOutput()
PickByZone(985, 32, vars)
s = s + GetPickOutput()
PickByZone(995, 29, vars)
s = s + GetPickOutput()
PickByZone(948, 26, vars)
s = s + GetPickOutput()
PickByZone(931, 30, vars)
s = s + GetPickOutput()
PickByZone(966, 36, vars)
s = s + GetPickOutput()
PickByZone(927, 27, vars)
s = s + GetPickOutput()
PickByZone(919, 33, vars)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("bigsil.silo"))
AddPlot("Pseudocolor", "dist")
DrawPlots()
ResetView()
v = GetView3D()
v.viewNormal= (1, 0, 0)
SetView3D(v)
vars = ("default")
Pick(250, 64, vars)
s = s + GetPickOutput()
Pick(149, 135, vars)
s = s + GetPickOutput()
Pick(227, 72, vars)
s = s + GetPickOutput()
Pick(65, 65, vars)
s = s + GetPickOutput()
Pick(67, 228, vars)
s = s + GetPickOutput()
# Test new pick method
PickByZone(13, 3, vars)
s = s + GetPickOutput()
PickByZone(1, 15, vars)
s = s + GetPickOutput()
PickByZone(118, 3, vars)
s = s + GetPickOutput()
PickByZone(258, 21, vars)
s = s + GetPickOutput()
PickByZone(279, 27, vars)
s = s + GetPickOutput()
#Bug '4571, pick crashing when bad vars specified
vars = ("aspect")
Pick(67, 228, vars)
s = s + GetPickOutput()
vars = ("mesh_quality/aspect", "spurious")
Pick(67, 228, vars)
s = s + GetPickOutput()
TestText("PickMultiBlock", s)
DeleteAllPlots()
ResetPickLetter()
def PickSurface():
OpenDatabase(silo_data_path("rect3d.silo"))
AddPlot("Surface", "d")
AddOperator("Slice")
slice = SliceAttributes()
slice.originIntercept = 0.5
slice.project2d = 1
slice.axisType = slice.YAxis
SetOperatorOptions(slice)
DrawPlots()
ResetView()
v = GetView3D()
v.viewNormal = (0, 1, 0)
v.viewUp = (0, 0, -1)
SetView3D(v)
pa = GetPickAttributes()
pa.variables = ("default")
SetPickAttributes(pa)
Pick(141, 178)
s = GetPickOutput()
NodePick(141, 178)
s = s + GetPickOutput()
Pick(194, 144)
s = s + GetPickOutput()
NodePick(194, 144)
s = s + GetPickOutput()
Pick(149, 197)
s = s + GetPickOutput()
NodePick(149, 197)
s = s + GetPickOutput()
Pick(64, 102)
s = s + GetPickOutput()
NodePick(64, 102)
s = s + GetPickOutput()
Pick(138, 126)
s = s + GetPickOutput()
NodePick(138, 126)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("curv2d.silo"))
AddPlot("Surface", "p")
DrawPlots()
ResetView()
v = GetView3D()
v.viewNormal = (0, 1, 0)
v.viewUp = (0, 0, -1)
SetView3D(v)
Pick(103, 227)
s = s + GetPickOutput()
NodePick(103, 227)
s = s + GetPickOutput()
Pick(171, 86)
s = s + GetPickOutput()
NodePick(171, 86)
s = s + GetPickOutput()
Pick(129, 63)
s = s + GetPickOutput()
NodePick(129, 63)
s = s + GetPickOutput()
Pick(153, 177)
s = s + GetPickOutput()
NodePick(153, 177)
s = s + GetPickOutput()
Pick(188, 167)
s = s + GetPickOutput()
NodePick(188, 167)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("ucd2d.silo"))
AddPlot("Surface", "d")
DrawPlots()
ResetView()
v = GetView3D()
v.viewNormal = (0.329152, -0.014518, -0.944165)
v.focus = (2, 2, 2)
v.viewUp = (-0.944025, -0.0281555, -0.32867)
SetView3D(v)
s = s + "\nThe next three results should be the same.\n"
Pick(118, 112)
s = s + GetPickOutput()
PickByZone(3)
s = s + GetPickOutput()
Pick((2.74917, 2.79753, 2.82784))
s = s + GetPickOutput()
s = s + "\nThe next three results should be the same.\n"
NodePick(118, 112)
s = s + GetPickOutput()
PickByNode(11)
s = s + GetPickOutput()
NodePick((2.5, 2.5, 1.41421))
s = s + GetPickOutput()
s = s + "\nThe next three results should be the same.\n"
NodePick(139, 73)
s = s + GetPickOutput()
PickByNode(4)
s = s + GetPickOutput()
NodePick((4.0, 2.0, 4.0))
s = s + GetPickOutput()
TestText("PickSurface", s)
DeleteAllPlots()
ResetPickLetter()
def PickBigSilMat():
OpenDatabase(silo_data_path("bigsil.silo"))
AddPlot("Pseudocolor", "dist")
DrawPlots()
ResetView()
pa = GetPickAttributes()
pa.showNodePhysicalCoords = 1
SetPickAttributes(pa)
vars = "mat"
Pick(87, 215, vars)
s = GetPickOutput()
NodePick(87, 215, vars)
s = s + GetPickOutput()
Pick(149, 146, vars)
s = s + GetPickOutput()
NodePick(149, 146, vars)
s = s + GetPickOutput()
Pick(89, 54, vars)
s = s + GetPickOutput()
NodePick(89, 54, vars)
s = s + GetPickOutput()
Pick(217, 74, vars)
s = s + GetPickOutput()
NodePick(217, 74, vars)
s = s + GetPickOutput()
Pick(215, 233, vars)
s = s + GetPickOutput()
NodePick(215, 233, vars)
s = s + GetPickOutput()
Pick(186, 193, vars)
s = s + GetPickOutput()
NodePick(186, 193, vars)
s = s + GetPickOutput()
Pick(190, 106, vars)
s = s + GetPickOutput()
NodePick(190, 106, vars)
s = s + GetPickOutput()
Pick(117, 173, vars)
s = s + GetPickOutput()
NodePick(117, 173, vars)
s = s + GetPickOutput()
Pick(98, 86, vars)
s = s + GetPickOutput()
NodePick(98, 86, vars)
s = s + GetPickOutput()
Pick(185, 116, vars)
s = s + GetPickOutput()
NodePick(185, 116, vars)
s = s + GetPickOutput()
# Test new pick methods
PickByZone(319, 25, vars)
s = s + GetPickOutput()
PickByNode(476, 25, vars)
s = s + GetPickOutput()
PickByZone(318, 23, vars)
s = s + GetPickOutput()
PickByNode(475, 23, vars)
s = s + GetPickOutput()
PickByZone(311, 21, vars)
s = s + GetPickOutput()
PickByNode(475, 21, vars)
s = s + GetPickOutput()
PickByZone(332, 27, vars)
s = s + GetPickOutput()
PickByNode(491, 27, vars)
s = s + GetPickOutput()
PickByZone(294, 27, vars)
s = s + GetPickOutput()
PickByNode(456, 27, vars)
s = s + GetPickOutput()
PickByZone(329, 21, vars)
s = s + GetPickOutput()
PickByNode(497, 21, vars)
s = s + GetPickOutput()
PickByZone(329, 23, vars)
s = s + GetPickOutput()
PickByNode(496, 23, vars)
s = s + GetPickOutput()
PickByZone(329, 19, vars)
s = s + GetPickOutput()
PickByNode(485, 19, vars)
s = s + GetPickOutput()
PickByZone(294, 24, vars)
s = s + GetPickOutput()
PickByNode(448, 24, vars)
s = s + GetPickOutput()
TestText("PickBigSilMat", s)
DeleteAllPlots()
pa.showNodePhysicalCoords = 0
SetPickAttributes(pa)
ResetPickLetter()
def PickOnionPeel2():
#From defect VisIt00003981, onionpeel and window ACTUAL_EXTENTS
#pick not working
print(tests_path("queries","pickonionpeel.session"), 0,silo_data_path("curv3d.silo"))
RestoreSessionWithDifferentSources(tests_path("queries","pickonionpeel.session"), 0,
silo_data_path("curv3d.silo"))
vars = "default"
Pick(196, 194, vars)
s = GetPickOutput()
Pick(59, 73, vars)
s = s + GetPickOutput()
Pick(128, 111, vars)
s = s + GetPickOutput()
Pick(50, 90, vars)
s = s + GetPickOutput()
Pick(275, 203, vars)
s = s + GetPickOutput()
Pick(277, 225, vars)
s = s + GetPickOutput()
Pick(52, 109, vars)
s = s + GetPickOutput()
op = OnionPeelAttributes()
op.adjacencyType = op.Face
op.requestedLayer = 1
op.index = 1
SetOperatorOptions(op)
Pick(52, 105, vars)
s = s + GetPickOutput()
Pick(67, 65, vars)
s = s + GetPickOutput()
Pick(51, 86, vars)
s = s + GetPickOutput()
Pick(265, 210, vars)
s = s + GetPickOutput()
Pick(172, 165, vars)
s = s + GetPickOutput()
op.index = 317
op.requestedLayer = 0
SetOperatorOptions(op)
Pick(76, 70, vars)
s = s + GetPickOutput()
Pick(37, 120, vars)
s = s + GetPickOutput()
Pick(119, 174, vars)
s = s + GetPickOutput()
Pick(273, 188, vars)
s = s + GetPickOutput()
op.adjacencyType = op.Node
op.requestedLayer = 3
SetOperatorOptions(op)
Pick(96, 72, vars)
s = s + GetPickOutput()
Pick(27, 144, vars)
s = s + GetPickOutput()
Pick(115, 102, vars)
s = s + GetPickOutput()
Pick(134, 140, vars)
s = s + GetPickOutput()
Pick(288, 185, vars)
s = s + GetPickOutput()
TestText("PickOnionPeel2", s)
DeleteAllPlots()
ResetPickLetter()
def PickSpecMix():
#VisIt '3864
OpenDatabase(silo_data_path("specmix_quad.silo"))
AddPlot("Pseudocolor", "Species")
DrawPlots()
v = GetView2D()
v.windowCoords = (0, 1, 0, 1)
SetView2D(v)
vars = ("default")
Pick(69, 137, vars)
s = GetPickOutput()
NodePick(90, 119, vars)
s = s + GetPickOutput()
Pick(139, 142, vars)
s = s + GetPickOutput()
NodePick(170, 126, vars)
s = s + GetPickOutput()
Pick(201, 95, vars)
s = s + GetPickOutput()
Pick(78, 75, vars)
s = s + GetPickOutput()
Pick(256, 169, vars)
s = s + GetPickOutput()
# Test new pick method
PickByZone(233, vars)
s = s +GetPickOutput()
PickByNode(266, vars)
s = s +GetPickOutput()
silr = SILRestriction()
onoff = 0
for sets in silr.SetsInCategory('Species'):
if(onoff == 0):
silr.TurnOffSet(sets)
onoff = 1
else:
onoff = 0
SetPlotSILRestriction(silr)
NodePick(140, 197, vars)
s = s + GetPickOutput()
Pick(249, 112, vars)
s = s + GetPickOutput()
NodePick(125, 137, vars)
s = s + GetPickOutput()
Pick(191, 136, vars)
s = s + GetPickOutput()
vars = ("d", "Species")
NodePick(204, 135, vars)
s = s + GetPickOutput()
Pick(138, 118, vars)
s = s + GetPickOutput()
NodePick(104, 139, vars)
s = s + GetPickOutput()
Pick(94, 151, vars)
s = s + GetPickOutput()
NodePick(182, 99, vars)
s = s + GetPickOutput()
# now test with 'd' as the active plot variable, should
# get the same results.
ChangeActivePlotsVar("d")
NodePick(204, 135, vars)
s = s + GetPickOutput()
Pick(138, 118, vars)
s = s + GetPickOutput()
NodePick(104, 139, vars)
s = s + GetPickOutput()
Pick(94, 151, vars)
s = s + GetPickOutput()
NodePick(182, 99, vars)
s = s + GetPickOutput()
TestText("PickSpecMix", s)
DeleteAllPlots()
ResetPickLetter()
def PickCurve():
OpenDatabase(data_path("curve_test_data/curve.visit"))
AddPlot("Curve", "parabolic")
SetTimeSliderState(72)
DrawPlots()
v = GetViewCurve()
v.rangeCoords = (0, 1)
SetViewCurve(v)
pa = GetPickAttributes()
pa.variables = ("default")
SetPickAttributes(pa)
Pick(72, 53)
p = GetPickOutput()
Pick(156, 22)
p = p + GetPickOutput()
Pick(15, 128)
p = p + GetPickOutput()
Pick(212, 200)
p = p + GetPickOutput()
Pick((0.2, 0.7))
p = p + GetPickOutput()
Pick((0.8, 0.35))
p = p + GetPickOutput()
Pick((0.6, 0.6))
p = p + GetPickOutput()
Pick((0.3, 0.5))
p = p + GetPickOutput()
TestText("PickCurve", p)
ResetPickLetter()
DeleteAllPlots()
def PickMultiWindow():
OpenDatabase(silo_data_path("wave*.silo database"))
AddPlot("FilledBoundary", "Material")
SetTimeSliderState(31)
DrawPlots()
v = GetView3D()
v.viewNormal = (0, -1, 0)
v.viewUp = (0, 0, 1)
SetView3D(v)
CloneWindow()
SetTimeSliderState(64)
DrawPlots()
pt1a = (7.20585, 0.099664, 2.5)
pt1b = (5.867554, 0.264801, 3.566963)
pt2a = (7.20585, 0.099664, 2.378386)
pt2b = (5.867554, 0.039652, 3.566963)
# Same DB, same plot, same var, different ts
SetActiveWindow(1)
Pick(pt1a)
s = GetPickOutput()
SetActiveWindow(2)
Pick(pt2a)
s = s + GetPickOutput()
SetActiveWindow(1)
Pick(pt1b)
s = s + GetPickOutput()
SetActiveWindow(2)
Pick(pt2b)
s = s + GetPickOutput()
# Same DB, same plot, different var, different ts
SetActiveWindow(1)
DeleteAllPlots()
AddPlot("Pseudocolor", "v")
DrawPlots()
Pick(pt1a)
s = s + GetPickOutput()
Pick(pt1b)
s = s + GetPickOutput()
SetActiveWindow(2)
DeleteAllPlots()
AddPlot("Pseudocolor", "pressure")
DrawPlots()
Pick(pt2a)
s = s + GetPickOutput()
Pick(pt2b)
s = s + GetPickOutput()
TestText("PickMultiWindow", s)
ResetPickLetter()
# delete window 2
DeleteWindow()
# remove plots from window 1
DeleteAllPlots()
#
# Sets up a couple test cases that test how pick interacts with the engine
# being gone.
#
def PickBadEngineSetup(testName, GetRidOfEngineCallback):
OpenDatabase(silo_data_path("curv3d.silo"))
AddPlot("Pseudocolor", "u")
DrawPlots()
v = View3DAttributes()
v.viewNormal = (-0.423782, 0.331476, 0.842931)
v.focus = (0, 2.5, 15)
v.viewUp = (0.111716, 0.942652, -0.314525)
v.viewAngle = 30
v.parallelScale = 16.0078
v.nearPlane = -32.0156
v.farPlane = 32.0156
v.imagePan = (-0.0549008, 0.0570848)
v.imageZoom = 1.35304
v.perspective = 1
v.eyeAngle = 2
v.centerOfRotationSet = 0
v.centerOfRotation = (0, 0, 0)
SetView3D(v)
ptA = (0.115986, 4.290420, 29.9)
Pick(ptA)
s = ""
s = s + GetPickOutput()
ptB = (0.040697, 2.250070, 29.9)
Pick(ptB)
s = s + GetPickOutput()
# Get rid of the compute engine running on localhost.
s = s + GetRidOfEngineCallback()
# Create plots in a new window before returning to window 1 to
# pick again. This will force the network ids in window 1 to be
# invalid in case they do not get reset. (But they do get reset now)
AddWindow()
SetActiveWindow(2)
DeleteAllPlots()
OpenDatabase(silo_data_path("globe.silo"))
AddPlot("Pseudocolor", "u")
DrawPlots()
SetActiveWindow(1)
# Resume picking in window 1 now that there are networks in window 2.
ptC = (0.15, 3.250070, 26.9)
Pick(ptC)
s = s + GetPickOutput()
ptD = (0.19, 3.75, 26.9)
Pick(ptD)
s = s + GetPickOutput()
TestText(testName, s)
ResetPickLetter()
DeleteAllPlots()
# Delete window 2.
SetActiveWindow(2)
DeleteWindow()
#
# Tests that pick works after an engine has been closed by the user.
#
def PickAfterEngineClosed():
def CloseCB():
CloseComputeEngine("localhost")
return "***\n*** Closed engine on localhost.\n***\n"
PickBadEngineSetup("PickAfterEngineClose", CloseCB)
#
# Tests that pick works after an engine has crashed.
#
def PickAfterEngineCrashed():
#TODO: THIS WONT WORK ON WINDOWs
def CrashCB():
try:
# Read the output of ps
f = os.popen("ps")
lines = f.readlines()
f.close()
# Get a list of engine pids from the ps output.
pids = []
for line in lines:
if string.find(line, "engine_") == -1:
continue
tokens = string.split(line, " ")
lv = []
for t in tokens:
if t != "":
lv = lv + [t]
if len(lv) > 0:
pids = pids + [lv[0]]
# Kill all of the engines in the pid list.
if len(pids) < 1:
print("Killing all engines because we could not get a list of pids", file=sys.stderr)
# TODO_WINDOWS THIS WONT WORK ON WINDOWS
os.system("killall engine_ser")
os.system("killall engine_par")
else:
for pid in pids:
print("Killing engine %s" % pid, file=sys.stderr)
# TODO_WINDOWS THIS WONT WORK ON WINDOWS
os.system("kill -9 %s" % pid)
except:
# There was an error. Just close the engine instead of killing it.
CloseComputeEngine("localhost")
return "***\n*** Killed compute engine(s).\n***\n"
PickBadEngineSetup("PickAfterEngineCrash", CrashCB)
def PickBoundary():
# VisIt00004807
# Test Pick on a 2D Boundary plot.
ResetPickAttributes()
OpenDatabase(silo_data_path("curv2d.silo"))
AddPlot("Boundary", "mat1")
DrawPlots()
ResetView()
SetViewExtentsType("original")
Pick(164, 136)
s = GetPickOutput()
PickByZone(482)
s = s + GetPickOutput()
NodePick(164, 136)
s = s + GetPickOutput()
PickByNode(528)
s = s + GetPickOutput()
Pick(113, 84)
s = s + GetPickOutput()
PickByZone(230)
s = s + GetPickOutput()
NodePick(113, 84)
s = s + GetPickOutput()
PickByNode(239)
s = s + GetPickOutput()
Pick(218, 65)
s = s + GetPickOutput()
PickByZone(211)
s = s + GetPickOutput()
NodePick(218, 65)
s = s + GetPickOutput()
PickByNode(220)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("specmix_quad.silo"))
AddPlot("Boundary", "Material")
DrawPlots()
ResetView()
Pick(107, 131)
s = s + GetPickOutput()
PickByZone(86)
s = s + GetPickOutput()
NodePick(107, 131)
s = s + GetPickOutput()
PickByNode(89)
s = s + GetPickOutput()
Pick(207, 145)
s = s + GetPickOutput()
PickByZone(297)
s = s + GetPickOutput()
NodePick(207, 145)
s = s + GetPickOutput()
PickByNode(333)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("specmix_ucd.silo"))
AddPlot("Boundary", "Material")
DrawPlots()
ResetView()
vars = "p"
Pick(107, 131, vars)
s = s + GetPickOutput()
PickByZone(86, vars)
s = s + GetPickOutput()
NodePick(107, 131, vars)
s = s + GetPickOutput()
PickByNode(89, vars)
s = s + GetPickOutput()
Pick(207, 145, vars)
s = s + GetPickOutput()
PickByZone(297, vars)
s = s + GetPickOutput()
NodePick(207, 145, vars)
s = s + GetPickOutput()
PickByNode(333, vars)
s = s + GetPickOutput()
DeleteAllPlots()
#Test Sliced Boundary plots
ResetOperatorOptions("Slice")
OpenDatabase(silo_data_path("curv3d.silo"))
AddPlot("Boundary", "mat1")
AddOperator("Slice")
slice = SliceAttributes()
slice.normal = (0, -1, 0)
slice.upAxis = (0, 0, 1)
SetOperatorOptions(slice)
DrawPlots()
ResetView()
Pick(83, 223, vars)
s = s + GetPickOutput()
PickByZone(26670, vars)
s = s + GetPickOutput()
NodePick(83, 223, vars)
s = s + GetPickOutput()
PickByNode(28272, vars)
s = s + GetPickOutput()
Pick(127, 84, vars)
s = s + GetPickOutput()
PickByZone(5399, vars)
s = s + GetPickOutput()
NodePick(127, 84, vars)
s = s + GetPickOutput()
PickByNode(7005, vars)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("sid97.silo"))
AddPlot("Boundary", "mat1")
AddOperator("Slice")
slice = SliceAttributes()
slice.originType = slice.Point
slice.originPoint = (7400, -1300, 1000)
slice.normal = (0, 1, 0)
slice.project2d = 1
SetOperatorOptions(slice)
DrawPlots()
ResetView()
SetViewExtentsType("actual")
pick = GetPickAttributes()
pick.variables = ("default")
SetPickAttributes(pick)
Pick(128, 140)
s = s + GetPickOutput()
PickByZone(1269)
s = s + GetPickOutput()
NodePick(128, 140)
s = s + GetPickOutput()
PickByNode(1356)
s = s + GetPickOutput()
Pick(120, 89)
s = s + GetPickOutput()
PickByZone(10438)
s = s + GetPickOutput()
NodePick(120, 89)
s = s + GetPickOutput()
PickByNode(12836)
s = s + GetPickOutput()
Pick(154, 50)
s = s + GetPickOutput()
PickByZone(10455)
s = s + GetPickOutput()
NodePick(154, 50)
s = s + GetPickOutput()
PickByNode(12842)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("rect3d.silo"))
AddPlot("Boundary", "mat1")
AddOperator("Slice")
slice.originType = slice.Intercept
slice.originIntercept = 0.5
slice.normal = (0, 1, 1)
slice.upAxis = (0, 1, 0)
slice.project2d = 1
SetOperatorOptions(slice)
DrawPlots()
ResetView()
SetViewExtentsType("original")
Pick(75, 258)
s = s + GetPickOutput()
PickByZone(810)
s = s + GetPickOutput()
NodePick(75, 258)
s = s + GetPickOutput()
PickByNode(869)
s = s + GetPickOutput()
Pick(121, 108)
s = s + GetPickOutput()
PickByZone(18217)
s = s + GetPickOutput()
NodePick(121, 108)
s = s + GetPickOutput()
PickByNode(20561)
s = s + GetPickOutput()
TestText("PickBoundary", s)
DeleteAllPlots()
ResetPickLetter()
def PickVectorPlots():
OpenDatabase(silo_data_path("globe.silo"))
AddPlot("Vector", "vel")
vector = VectorAttributes()
vector.autoScale = 0
SetPlotOptions(vector)
DrawPlots()
v = GetView3D()
v.viewNormal = (0, 0, 1)
v.focus = (0, 0, 0)
v.viewUp = (0, 1, 0)
v.viewAngle = 30
v.parallelScale = 17.3205
v.nearPlane = -34.641
v.farPlane = 34.641
v.imagePan = (0, 0)
v.imageZoom = 2.02836
v.perspective = 1
v.eyeAngle = 2
v.centerOfRotationSet = 0
v.centerOfRotation = (0, 0, 0)
SetView3D(v)
p = GetPickAttributes()
p.variables = ("default")
SetPickAttributes(p)
Pick(274, 259)
s = GetPickOutput()
Pick(269, 258)
s = s + GetPickOutput()
Pick(86, 37)
s = s + GetPickOutput()
Pick(83, 28)
s = s + GetPickOutput()
AddOperator("Slice")
slice = SliceAttributes()
slice.axisType = slice.ZAxis
SetOperatorOptions(slice)
DrawPlots()
Pick(96, 244)
s = s + GetPickOutput()
Pick(204, 88)
s = s + GetPickOutput()
RemoveLastOperator()
ChangeActivePlotsVar("disp")
vector = VectorAttributes()
vector.autoScale = 0
vector.scale = 1.
vector.origOnly = 0
SetPlotOptions(vector)
v.viewNormal = (-0.8775, 0.112599, 0.46617)
v.focus = (0, 0, 0)
v.viewUp = (0.120127, 0.992665, -0.0136456)
v.viewAngle = 30
v.parallelScale = 17.3205
v.nearPlane = -34.641
v.farPlane = 34.641
v.imagePan = (0, 0)
v.imageZoom = 2.3515
v.perspective = 1
v.eyeAngle = 2
v.centerOfRotationSet = 0
v.centerOfRotation = (0, 0, 0)
SetView3D(v)
Pick(119, 87)
s = s + GetPickOutput();
Pick(148, 230)
s = s + GetPickOutput();
Pick(22, 97)
s = s + GetPickOutput();
AddOperator("Slice")
DrawPlots()
Pick(76, 113)
s = s + GetPickOutput();
Pick(244, 67)
s = s + GetPickOutput();
Pick(127, 217)
s = s + GetPickOutput();
DeleteAllPlots()
# VisIt00006296 -- pick of vector expression causes crash
DefineVectorExpression("polarVector", "polar(mesh1)")
DefineVectorExpression("xyzVector", "coord(mesh1)")
AddPlot("Vector", "polarVector")
DrawPlots()
ResetView()
v = GetView3D()
v.viewNormal = (0, 0, 1)
v.focus = (0, 0, 0)
v.viewUp = (0, 1, 0)
v.viewAngle = 30
v.parallelScale = 17.3205
v.nearPlane = -34.641
v.farPlane = 34.641
v.imagePan = (-0.0369757, 0.0171359)
v.imageZoom = 4.66857
v.perspective = 1
v.eyeAngle = 2
v.centerOfRotationSet = 0
v.centerOfRotation = (0, 0, 0)
SetView3D(v)
Pick(233, 241)
s = s + GetPickOutput()
Pick(226, 30)
s = s + GetPickOutput()
ChangeActivePlotsVar("xyzVector")
v. imagePan = (0.0220781, -0.0509109)
v. imageZoom = 9.89113
SetView3D(v)
Pick(149, 209)
s = s + GetPickOutput()
Pick(214, 6)
s = s + GetPickOutput()
TestText("PickVectorPlot", s)
DeleteAllPlots()
ResetPickLetter()
def PickPointMeshes():
OpenDatabase(silo_data_path("noise.silo"))
AddPlot("Pseudocolor", "PointVar")
pc = PseudocolorAttributes()
pc.pointSize = 1
SetPlotOptions(pc)
DrawPlots()
ResetView()
NodePick(100, 240)
s = GetPickOutput()
Pick(223, 197)
s = s + GetPickOutput()
NodePick(138, 66)
s = s + GetPickOutput()
DeleteAllPlots()
AddPlot("Mesh", "PointMesh")
mesh = MeshAttributes()
mesh.pointSize = 1
mesh.pointType = mesh.Box
SetPlotOptions(mesh)
DrawPlots()
NodePick(100, 240)
s = s + GetPickOutput()
Pick(223, 197)
s = s + GetPickOutput()
NodePick(138, 66)
s = s + GetPickOutput()
mesh.pointType = mesh.Point
SetPlotOptions(mesh)
NodePick(100, 240)
s = s + GetPickOutput()
Pick(223, 197)
s = s + GetPickOutput()
NodePick(138, 66)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("multi_point2d.silo"))
AddPlot("Mesh", "mesh1")
m = MeshAttributes()
m.meshColor = (255, 0, 255, 255)
m.meshColorSource = m.MeshCustom
m.pointSize = 0.05
m.pointType = m.Box
SetPlotOptions(m)
DrawPlots()
v = GetView2D()
v.fullFrameActivationMode = v.On
v.windowCoords = (-2.05391, -0.442661, 1.02233, 2.43681)
SetView2D(v)
vars = ("d", "p", "u", "v")
NodePick(122, 72, vars)
s = s + GetPickOutput()
Pick(134, 229, vars)
s = s + GetPickOutput()
NodePick(278, 266, vars)
s = s + GetPickOutput()
m.pointType = mesh.Point
SetPlotOptions(m)
NodePick(122, 72, vars)
s = s + GetPickOutput()
Pick(134, 229, vars)
s = s + GetPickOutput()
NodePick(278, 266, vars)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("noise.silo"))
AddPlot("Subset", "PointMesh")
DrawPlots()
ResetView()
NodePick(100, 240)
s = s+ GetPickOutput()
Pick(223, 197)
s = s + GetPickOutput()
NodePick(138, 66)
s = s + GetPickOutput()
TestText("PickPointMeshes", s)
DeleteAllPlots()
ResetPickLetter()
def PickGlobalIds():
OpenDatabase(silo_data_path("global_node.silo"))
AddPlot("Pseudocolor", "dist")
DrawPlots()
ResetView()
p = GetPickAttributes()
p.showGlobalIds = 0
p.variables = ("default")
SetPickAttributes(p)
Pick(82, 225)
s = GetPickOutput()
p.showGlobalIds = 1
SetPickAttributes(p)
Pick(82, 225)
s = s + GetPickOutput()
p.showGlobalIds = 0
SetPickAttributes(p)
NodePick(195, 101)
s = s + GetPickOutput()
p.showGlobalIds = 1
SetPickAttributes(p)
NodePick(195, 101)
s = s + GetPickOutput()
p.showGlobalIds = 0
SetPickAttributes(p)
Pick(175, 162)
s = s + GetPickOutput()
NodePick(175, 162)
s = s + GetPickOutput()
p.showGlobalIds = 1
SetPickAttributes(p)
Pick(175, 162)
s = s + GetPickOutput()
NodePick(175, 162)
s = s + GetPickOutput()
PickByGlobalZone(3250)
s = s + GetPickOutput()
PickByGlobalZone(237394)
s = s + GetPickOutput()
PickByGlobalNode(3869)
s = s + GetPickOutput()
PickByGlobalNode(246827)
s = s + GetPickOutput()
# bug '6097 -- global ids not displayed correctly with global picks.
p.showGlobalIds = 1
SetPickAttributes(p)
PickByGlobalZone(236919)
s = s + GetPickOutput()
PickByGlobalNode(244455)
s = s + GetPickOutput()
ChangeActivePlotsVar("p")
PickByGlobalZone(236919)
s = s + GetPickOutput()
PickByGlobalNode(244455)
s = s + GetPickOutput()
TestText("PickGlobalIds", s)
p.showGlobalIds = 0
SetPickAttributes(p)
DeleteAllPlots()
ResetPickLetter()
def PickExpressions():
OpenDatabase(silo_data_path("rect3d.silo"))
DefineScalarExpression("m1", 'matvf(mat1, ["1", "3"])')
DefineScalarExpression("mir1", 'mirvf(mat1, zoneid(quadmesh3d), volume(quadmesh3d), 1)')
AddPlot("Pseudocolor", "m1")
DrawPlots()
ResetView()
Pick(151, 172)
s = GetPickOutput()
Pick(68, 239)
s = s + GetPickOutput()
Pick(237, 86)
s = s + GetPickOutput()
NodePick(151, 172)
s = s + GetPickOutput()
NodePick(68, 239)
s = s + GetPickOutput()
NodePick(237, 86)
s = s + GetPickOutput()
ChangeActivePlotsVar("mir1")
Pick(151, 172)
s = s + GetPickOutput()
Pick(68, 239)
s = s + GetPickOutput()
Pick(237, 86)
s = s + GetPickOutput()
NodePick(151, 172)
s = s + GetPickOutput()
NodePick(68, 239)
s = s + GetPickOutput()
NodePick(237, 86)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("globe.silo"))
AddPlot("Pseudocolor", "t")
DrawPlots()
ResetView()
DefineScalarExpression("polar", "polar(mesh1)")
# pick with default var -- 't'
Pick(128, 107)
s = s + GetPickOutput()
# pick again, adding new expression var -- 'polar'
vars = ("default", "polar")
Pick(128, 107, vars)
s = s + GetPickOutput()
TestText("PickExpressions", s)
DeleteAllPlots()
ResetPickLetter()
def PickAMR():
OpenDatabase(data_path("boxlib_test_data/2D/plt0822/Header"))
AddPlot("Mesh", "Mesh")
AddPlot("Pseudocolor", "density")
DrawPlots()
ResetView()
v = GetView2D()
v.fullFrameActivationMode = v.Off
v.windowCoords = (0.0232322, 0.0302984, 0.11825, 0.123807)
SetView2D(v)
s = "Testing boxlib 2D, pseudocolor\n"
vars = "default"
NodePick(226, 179, vars)
s = s + GetPickOutput()
ZonePick(226, 179, vars)
s = s + GetPickOutput()
NodePick(215, 168, vars)
s = s + GetPickOutput()
ZonePick(215, 168, vars)
s = s + GetPickOutput()
NodePick(114, 94, vars)
s = s + GetPickOutput()
ZonePick(114, 94, vars)
s = s + GetPickOutput()
NodePick(189, 197, vars)
s = s + GetPickOutput()
ZonePick(189, 197, vars)
s = s + GetPickOutput()
NodePick(242, 72, vars)
s = s + GetPickOutput()
ZonePick(242, 72, vars)
s = s + GetPickOutput()
DeleteAllPlots()
s = s + "\nTesting boxlib 2D, contour\n"
AddPlot("Contour", "density")
DrawPlots()
v.windowCoords = (0.00408394, 0.0401985, 0.109754, 0.138135)
SetView2D(v)
Pick(161, 137)
s = s + GetPickOutput()
NodePick(161, 137)
s = s + GetPickOutput()
Pick(176, 139)
s = s + GetPickOutput()
NodePick(176, 139)
s = s + GetPickOutput()
Pick(228, 71)
s = s + GetPickOutput()
NodePick(228, 71)
s = s + GetPickOutput()
Pick(255, 196)
s = s + GetPickOutput()
NodePick(255, 196)
s = s + GetPickOutput()
DeleteAllPlots()
s = s + "\nTesting boxlib 2D, Boundary\n"
AddPlot("Boundary", "materials")
DrawPlots()
v.windowCoords = (0.00226909, 0.0378978, 0.0908832, 0.121254)
SetView2D(v)
Pick(161, 137)
s = s + GetPickOutput()
NodePick(161, 137)
s = s + GetPickOutput()
Pick(228, 71)
s = s + GetPickOutput()
NodePick(228, 71)
s = s + GetPickOutput()
Pick(139, 196)
s = s + GetPickOutput()
NodePick(139, 196)
s = s + GetPickOutput()
TestText("PickAMR", s)
DeleteAllPlots()
ResetPickLetter()
def PickSamrai():
def doPicks1():
def pickList(index):
if index == 0 :
ZonePick(172, 178)
return GetPickOutput()
elif index == 1 :
NodePick(191, 188)
return GetPickOutput()
elif index == 2:
NodePick(145, 157)
return GetPickOutput()
elif index == 3:
PickByZone(1863, 2)
return GetPickOutput()
elif index == 4:
PickByNode(2442, 2)
return GetPickOutput()
elif index == 5:
PickByNode(2422, 2)
return GetPickOutput()
else :
return ""
s = ""
for j in range(6):
for i in range(4):
SetActivePlots(i)
s = s + pickList(j)
return s
def doPicks2():
def pickList2(index):
if index == 0 :
ZonePick(239, 141)
return GetPickOutput()
elif index == 1 :
NodePick(246, 108)
return GetPickOutput()
else :
return ""
s = ""
for j in range(2):
for i in range(4):
SetActivePlots(i)
s = s + pickList2(j)
return s
def doPicks3():
def pickList3(index):
if index == 0 :
ZonePick(210, 148)
return GetPickOutput()
elif index == 1 :
NodePick(200, 148)
return GetPickOutput()
elif index == 2 :
ZonePick(210, 168)
return GetPickOutput()
elif index == 3 :
NodePick(210, 168)
return GetPickOutput()
else :
return ""
s = ""
for j in range(4):
for i in range(4):
SetActivePlots(i)
s = s + pickList3(j)
return s
# Open SAMRAI (add default subset plot)
# Add PC, Mesh, and Contour Plots
OpenDatabase(data_path("samrai_test_data/sil_changes/dumps.visit"))
slice = SliceAttributes()
slice.axisType = slice.ZAxis
slice.originType = slice.Percent
slice.originPercent = 20
slice.project2d = 1
AddPlot("Pseudocolor", "Primitive Var _number_0")
AddPlot("Mesh", "amr_mesh")
AddPlot("Contour", "Primitive Var _number_0")
SetActivePlots((0, 1, 2, 3))
AddOperator("Slice")
SetOperatorOptions(slice)
DrawPlots()
v = GetView2D()
v.windowCoords = (4.89115, 6.43144, 6.80336, 8.63983)
SetView2D(v)
s = "\nTesting sliced SAMRAI:\n"
s = s + doPicks1()
TestText("PickSamrai_01", s)
SetActivePlots((0, 1, 2, 3))
clip = ClipAttributes()
clip.plane1Origin = (5.1, 0, 0)
clip.plane1Normal = (-1, 0, 0)
AddOperator("Clip")
SetOperatorOptions(clip)
DrawPlots()
ResetPickLetter()
s = "\nTesting clipped sliced SAMRAI:\n"
s = s + doPicks1()
TestText("PickSamrai_02", s)
SetActivePlots((0, 1, 2, 3))
DemoteOperator(1)
DrawPlots()
ResetPickLetter()
s = "\nTesting sliced clipped SAMRAI:\n"
s = s + doPicks1()
TestText("PickSamrai_03", s)
SetActivePlots((0, 1, 2, 3))
RemoveLastOperator()
clip.plane1Origin = (4.3, 0, 0)
SetOperatorOptions(clip)
DrawPlots()
v = GetView3D()
v.viewNormal = (0, 0, -1)
v.focus = (15, 10, 10)
v.viewUp = (0, 1, 0)
v.parallelScale = 20.6155
v.nearPlane = -41.2311
v.farPlane = 41.2311
v.perspective = 0
SetView3D(v)
v.imageZoom = 8
SetView3D(v)
v.imagePan = (-0.2, 0.1)
SetView3D(v)
ResetPickLetter()
s = "\nTesting clipped SAMRAI (3D):\n"
s = s + doPicks2()
TestText("PickSamrai_04", s)
DeleteAllPlots()
ResetPickLetter()
OpenDatabase(data_path("samrai_test_data/front/dumps.visit"))
AddPlot("Mesh", "amr_mesh")
AddPlot("Pseudocolor", "Distance to front")
AddPlot("Contour", "Distance to front")
DrawPlots()
v = GetView2D()
v.windowCoords = (0.678228, 0.865969, 0.467317, 0.650137)
SetView2D(v)
s = "\nTesting front:\n"
s = s + doPicks3()
TestText("PickSamrai_05", s)
DeleteAllPlots()
ResetPickLetter()
def PickIndexSelect():
OpenDatabase(silo_data_path("rect2d.silo"))
AddPlot("Mesh", "quadmesh2d")
AddPlot("Pseudocolor", "u")
AddOperator("IndexSelect")
isAtts = IndexSelectAttributes()
isAtts.dim = isAtts.TwoD
isAtts.xMin = 1
isAtts.xMax = 2
isAtts.yMin = 1
isAtts.yMax = 2
SetOperatorOptions(isAtts)
DrawPlots()
v = GetView2D()
v.windowCoords = (-0.0583437, 0.254323, -0.0576062, 0.220944)
SetView2D(v)
SetActivePlots(0)
s = "Pick on Index-selected 2D Mesh Plot\n"
Pick(132, 117)
s = s + GetPickOutput()
NodePick(132, 117)
s = s + GetPickOutput()
SetActivePlots(1)
s = s + "\nSame Picks on Index-selected 2D Pseudocolor Plot\n"
Pick(132, 117)
s = s + GetPickOutput()
NodePick(132, 117)
s = s + GetPickOutput()
isAtts.xIncr = 5
isAtts.yIncr = 5
SetOperatorOptions(isAtts)
s = s+ "\nChanged stride of IndexSelect, 2D Mesh Plot picks\n"
SetActivePlots(0)
Pick(132, 117)
s = s + GetPickOutput()
NodePick(132, 117)
s = s + GetPickOutput()
s = s + "\nSame picks 2D Pseudocolor Plot \n"
SetActivePlots(1)
Pick(132, 117)
s = s + GetPickOutput()
NodePick(132, 117)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("rect3d.silo"))
AddPlot("Mesh", "quadmesh3d")
AddPlot("Pseudocolor", "d")
SetActivePlots((0, 1))
AddOperator("IndexSelect")
isAtts = IndexSelectAttributes()
isAtts.dim = isAtts.ThreeD
isAtts.xIncr = 4
isAtts.yIncr = 4
SetOperatorOptions(isAtts)
DrawPlots()
ResetView()
v = GetView3D()
v.viewNormal = (-1, 0, 0)
v.focus = (0.5, 0.5, 0.5)
v.viewUp = (0, 1, 0)
v.parallelScale = 0.866025
v.perspective = 1
SetView3D(v)
v.imagePan = (0.0552434, 0.225336)
SetView3D(v)
v.imageZoom = 5.01124
SetView3D(v)
s = s + "\nIndex selected 3D Mesh Plot\n"
SetActivePlots(0)
Pick(143, 144)
s = s + GetPickOutput()
NodePick(143, 144)
s = s + GetPickOutput()
s = s + "\nSame picks on 3D Pseudocolor Plot\n"
SetActivePlots(1)
Pick(143, 144)
s = s + GetPickOutput()
NodePick(143, 144)
s = s + GetPickOutput()
SetActivePlots((0, 1))
AddOperator("Slice")
slice = SliceAttributes()
slice.normal = (0, 0, 1)
slice.originType = slice.Intercept
slice.originIntercept = 0.5
slice.upAxis = (0, 1, 0)
slice.axisType = slice.ZAxis
slice.project2d = 1
SetOperatorOptions(slice)
DrawPlots()
v = GetView2D()
v.windowCoords = (0.226685, 0.501966, 0.147753, 0.423034)
SetView2D(v)
s = s + "\nSliced, Index-selected 3D Mesh Plot\n"
SetActivePlots(0)
Pick(184, 234)
s = s + GetPickOutput()
NodePick(184, 234)
s = s + GetPickOutput()
s = s + "\nSame pickes on Sliced, Index-selected 3D Pseudocolor Plot\n"
SetActivePlots(1)
Pick(184, 234)
s = s + GetPickOutput()
NodePick(184, 234)
s = s + GetPickOutput()
AddPlot("FilledBoundary", "mat1")
AddOperator("IndexSelect")
SetOperatorOptions(isAtts)
AddOperator("Slice")
SetOperatorOptions(slice)
AddPlot("Mesh", "quadmesh3d")
AddOperator("Slice")
SetOperatorOptions(slice)
DrawPlots()
s = s + "\nSame picks on Sliced, Index-selected 3D FilledBoundary Plot\n"
s = s + "Stride changes back to 1 due to MIR, so should match Mesh results below\n"
SetActivePlots(2)
Pick(184, 234)
s = s + GetPickOutput()
NodePick(184, 234)
s = s + GetPickOutput()
s = s + "\nSame picks on Sliced, 3D Mesh Plot\n"
SetActivePlots(3)
Pick(184, 234)
s = s + GetPickOutput()
NodePick(184, 234)
s = s + GetPickOutput()
TestText("PickIndexSelect", s)
DeleteAllPlots()
ResetPickLetter()
def PickTensors():
OpenDatabase(silo_data_path("noise.silo"))
AddPlot("Mesh", "Mesh")
DrawPlots()
vars = ("grad_tensor")
Pick(133 , 178, vars)
s = GetPickOutput()
NodePick(133 ,178 , vars)
s = s + GetPickOutput()
DeleteAllPlots()
AddPlot("Tensor", "grad_tensor")
DrawPlots()
v = GetView3D()
v.viewNormal = (0, 0, 1)
v.focus = (0, 0, 0)
v.viewUp = (0, 1, 0)
v.viewAngle = 30
v.parallelScale = 17.3205
v.nearPlane = -34.641
v.farPlane = 34.641
v.perspective = 1
v.eyeAngle = 2
v.centerOfRotationSet = 0
v.centerOfRotation = (0, 0, 0)
SetView3D(v)
v.imagePan = (-0.181384, 0.137462)
SetView3D(v)
v.imageZoom = 4.86765
SetView3D(v)
Pick(127, 59)
s = s + GetPickOutput()
Pick(269, 166)
s = s + GetPickOutput()
TestText("PickTensors", s)
ResetView()
DeleteAllPlots()
ResetPickLetter()
def PickMili():
#'7144
OpenDatabase(data_path("mili_test_data/single_proc/m_plot.mili"))
AddPlot("Pseudocolor", "Primal/brick/stress/sx")
AddOperator("Threshold")
thresh = ThresholdAttributes()
thresh.lowerBounds = (1.0)
thresh.upperBounds = (1.0)
thresh.listedVarNames = ("Primal/Shared/sand")
SetOperatorOptions(thresh)
SetTimeSliderState(77)
DrawPlots()
v = GetView3D()
v.viewNormal = (0.761946, 0.114249, -0.637483)
v.focus = (2, -4.76837e-07, -1.43051e-06)
v.viewUp = (-.133671, -.990866, 0.0178134)
v.viewAngle = 30
v.parallelScale = 15.7797
v.nearPlane = -31.5595
v.farPlane = 31.5595
SetView3D(v)
vars = "default"
Pick(100, 150, vars)
s = GetPickOutput()
NodePick(100, 150, vars)
s = s + GetPickOutput()
RemoveLastOperator()
#'7145
AddPlot("Mesh", "mesh1")
SetActivePlots((0, 1))
AddOperator("Clip")
clip = ClipAttributes()
clip.plane1Status = 1
clip.plane1Origin = (8, 7.77778, -10)
clip.plane1Normal = (1, 0, 0)
SetOperatorOptions(clip)
SetTimeSliderState(77)
DrawPlots()
v = GetView3D()
v.viewNormal = (1, 0, 6.12307e-17)
v.focus = (10.5296, -0.00138283, -0.000236511)
v.viewUp = (0, 1, 0)
v.viewAngle = 30
v.parallelScale = 19.0748
v.nearPlane = -38.1495
v.farPlane = 38.1495
SetView3D(v)
Pick(204, 215, vars)
s = s + GetPickOutput()
NodePick(204, 215, vars)
s = s + GetPickOutput()
TestText("PickMili", s)
DeleteAllPlots()
ResetPickLetter()
def PickContour():
#'7144
OpenDatabase(silo_data_path("multi_rect3d.silo"))
AddPlot("Contour", "d")
contour = ContourAttributes()
contour.contourNLevels = 4
SetPlotOptions(contour)
DrawPlots()
v = GetView3D()
v.viewNormal = (-0.582341, 0.658239, 0.477075)
v.focus = (0.5, 0.5, 0.5)
v.viewUp = (0.402453, 0.743318, -0.534331)
v.viewAngle = 30
v.parallelScale = 0.866025
v.nearPlane = -1.73205
v.farPlane = 1.73205
SetView3D(v)
vars = "default"
Pick(166, 138, vars)
s = GetPickOutput()
NodePick(166, 138, vars)
s = s + GetPickOutput()
Pick(160, 175, vars)
s = s + GetPickOutput()
NodePick(160, 175, vars)
s = s + GetPickOutput()
Pick(158, 210, vars)
s = s + GetPickOutput()
NodePick(158, 210, vars)
s = s + GetPickOutput()
TestText("PickContour", s)
DeleteAllPlots()
ResetPickLetter()
def PickBox():
#'7566
OpenDatabase(silo_data_path("rect2d.silo"))
AddPlot("Pseudocolor", "d")
AddOperator("Box")
box = BoxAttributes()
box.minx = 0.2
box.maxx = 0.8
box.miny = 0.2
box.maxy = 0.8
SetOperatorOptions(box)
AddPlot("Mesh", "quadmesh2d")
DrawPlots()
vars = "default"
SetActivePlots(0)
Pick(155, 140)
s = GetPickOutput()
NodePick(155, 140)
s = s + GetPickOutput()
SetActivePlots(1)
Pick(155, 140)
s = s + GetPickOutput()
NodePick(155, 140)
s = s + GetPickOutput()
DeleteAllPlots()
OpenDatabase(silo_data_path("rect3d.silo"))
AddPlot("Pseudocolor", "d")
AddOperator("Box")
box.minx = 0.3
box.maxx = 0.83
box.miny = 0.3
box.maxy = 0.83
box.minz = 0
box.maxz = 1
SetOperatorOptions(box)
AddOperator("Slice")
slice = SliceAttributes()
slice.axisType = slice.YAxis
slice.originType = slice.Intercept
slice.originIntercept = 0.5
slice.project2d = 1
SetOperatorOptions(slice)
AddPlot("Mesh", "quadmesh3d")
AddOperator("Slice")
SetOperatorOptions(slice)
DrawPlots()
SetActivePlots(0)
TurnMaterialsOff("8")
Pick(221, 230)
s = s + GetPickOutput()
Pick(206, 67)
s = s + GetPickOutput()
NodePick(221, 230)
s = s + GetPickOutput()
NodePick(206, 67)
s = s + GetPickOutput()
SetActivePlots(1)
Pick(221, 230)
s = s + GetPickOutput()
Pick(206, 67)
s = s + GetPickOutput()
NodePick(221, 230)
s = s + GetPickOutput()
NodePick(206, 67)
s = s + GetPickOutput()
TestText("PickBox", s)
DeleteAllPlots()
ResetPickLetter()
def PickScatter():
OpenDatabase(silo_data_path("noise.silo"))
AddPlot("Scatter", "hardyglobal")
scatter = ScatterAttributes()
scatter.var1= "hardyglobal"
scatter.var2= "shepardglobal"
scatter.var3= "radial"
scatter.var3Role = scatter.Color
scatter.scaleCube = 1
SetPlotOptions(scatter)
DrawPlots()
Pick(124, 174)
s = GetPickOutput()
scatter.scaleCube = 0
SetPlotOptions(scatter)
DrawPlots()
ResetView()
Pick(124, 174)
s = s + GetPickOutput()
DeleteAllPlots()
s = s + "Expressions used in Scatter\n";
OpenDatabase(silo_data_path("multi_rect3d.silo"))
DefineScalarExpression("xc", "coord(mesh1)[0]")
DefineScalarExpression("yc", "coord(mesh1)[1]")
DefineScalarExpression("zc", "coord(mesh1)[2]")
DefineScalarExpression("uvw_prod", "u*v*w")
AddPlot("Scatter", "xc")
scatter.var1 = "xc"
scatter.var1Role = scatter.Coordinate0
scatter.var2 = "yc"
scatter.var2Role = scatter.Coordinate1
scatter.var3 = "zc"
scatter.var3Role = scatter.Coordinate2
scatter.var4 = "uvw_prod"
scatter.var4Role = scatter.Color
SetPlotOptions(scatter)
DrawPlots()
ResetView()
Pick(100, 200)
s = s + GetPickOutput()
s = s + "Mix up the coordinates\n";
scatter.var1Role = scatter.Coordinate1
scatter.var2Role = scatter.Coordinate0
SetPlotOptions(scatter)
DrawPlots()
Pick(100, 200)
s = s + GetPickOutput()
TestText("PickScatter", s)
DeleteAllPlots()
ResetPickLetter()
def PickHighlight():
OpenDatabase(silo_data_path("noise.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "hardyglobal")
pickAtts = GetPickAttributes()
pickAtts.showPickHighlight = 1
SetPickAttributes(pickAtts)
DrawPlots()
PickByZone(116242)
Test("PickHighlight_01")
DeleteAllPlots()
ResetPickLetter()
OpenDatabase(silo_data_path("global_node.silo"))
AddPlot("Pseudocolor", "p")
DrawPlots()
# bug '3880 -- global id highlights incorrect cell.
origAtts = GetPickAttributes()
pickAtts = origAtts
pickAtts.showPickHighlight = 1
pickAtts.showPickLetter = 1
SetPickAttributes(pickAtts)
PickByGlobalZone(236919)
Test("GlobalHighlight_00")
SetPickAttributes(origAtts)
DeleteAllPlots()
ResetPickLetter()
#restore the attributes
annotAtts = GetAnnotationAttributes()
annotAtts.userInfoFlag = 1
annotAtts.axes3D.xAxis.title.visible = 1
annotAtts.axes3D.yAxis.title.visible = 1
annotAtts.axes3D.zAxis.title.visible = 1
annotAtts.axes3D.bboxFlag = 1;
annotAtts.axes3D.triadFlag = 1;
SetAnnotationAttributes(annotAtts)
def PickHighlightColor():
OpenDatabase(silo_data_path("noise.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "hardyglobal")
pickAtts = GetPickAttributes()
pickAtts.showPickHighlight = 1
pickAtts.pickHighlightColor = (0, 0, 255)
SetPickAttributes(pickAtts)
DrawPlots()
PickByZone(116242)
Test("PickHighlightColor_01")
DeleteAllPlots()
ResetPickLetter()
#restore the attributes
pickAtts.pickHighlightColor = (255, 0, 0)
SetPickAttributes(pickAtts)
annotAtts = GetAnnotationAttributes()
annotAtts.userInfoFlag = 1
annotAtts.axes3D.xAxis.title.visible = 1
annotAtts.axes3D.yAxis.title.visible = 1
annotAtts.axes3D.zAxis.title.visible = 1
annotAtts.axes3D.bboxFlag = 1;
annotAtts.axes3D.triadFlag = 1;
SetAnnotationAttributes(annotAtts)
def PickRange():
OpenDatabase(silo_data_path("noise.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "hardyglobal")
pickAtts = GetPickAttributes()
pickAtts.showPickHighlight = 1
SetPickAttributes(pickAtts)
DrawPlots()
options = {}
options["pick_range"] = "116242-116300, 116350,1"
PickByZone(options)
Test("PickRange_01")
DeleteAllPlots()
ResetPickLetter()
def PickLines3D():
OpenDatabase(silo_data_path("ucd_lines3d.silo"))
AddPlot("Mesh", "ucd_linesmesh3d")
DrawPlots()
ZonePick(113,182)
s = GetPickOutput();
ZonePick(134,107)
s = s + GetPickOutput();
ZonePick(177,151)
s = s + GetPickOutput();
NodePick(126,161)
s = s + GetPickOutput();
NodePick(203,130)
s = s + GetPickOutput();
NodePick(150,193)
s = s + GetPickOutput();
# rotate, so lines closer to camera are reversed.
v = GetView3D()
v.viewNormal=(0,0,-1)
SetView3D(v)
ZonePick(149,168)
s = s + GetPickOutput();
ZonePick(139,97)
s = s + GetPickOutput();
ZonePick(191,206)
s = s + GetPickOutput();
NodePick(161,73)
s = s + GetPickOutput();
NodePick(173,159)
s = s + GetPickOutput();
NodePick(54,153)
s = s + GetPickOutput();
TestText("PickLines3D", s)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def PickZoneLabel():
OpenDatabase(data_path("mili_test_data/single_proc/sslide14ball_l.plt.mili"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "Primal/shell/bend_magnitude")
DrawPlots()
options = {}
options["element_label"] = "shell 9"
options["vars"] = "OriginalZoneLabels"
PickByZoneLabel(options)
s = GetPickOutput()
TestText("PickByZoneLabel",s)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def PickNodeLabel():
OpenDatabase(data_path("mili_test_data/single_proc/sslide14ball_l.plt.mili"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "Primal/shell/bend_magnitude")
DrawPlots()
options = {}
options["element_label"] = "node 93"
options["vars"] = "OriginalNodeLabels"
PickByNodeLabel(options)
s = GetPickOutput()
TestText("PickByNodeLabel",s)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def PickRangeLabel():
OpenDatabase(data_path("mili_test_data/single_proc/d3samp6.plt.mili"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "Primal/shell/bend_magnitude")
DrawPlots()
SetPickAttributes(defaultAtts)
options = {}
options["element_label"] = "shell"
options["return_curves"] = 1
options["start_time"] = 0
options["end_time"] = 2
options["pick_range"] = "4-5,9"
options["vars"] = "OriginalZoneLabels"
output_dict = PickByZoneLabel(options)
# use json.dumps for dictionary object, makes for easier parsing
# of diffs when there are errors
TestText("PickRangeByZoneLabel",json.dumps(output_dict, indent=2))
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestRemovePicks():
OpenDatabase(silo_data_path("noise.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "hardyglobal")
pickAtts = GetPickAttributes()
pickAtts.showPickHighlight = 1
SetPickAttributes(pickAtts)
DrawPlots()
PickByZone(0)
PickByZone(5)
PickByZone(35)
PickByZone(18)
Test("RemovePicks_01")
to_remove = "A, C, D"
expected = to_remove
removed = RemovePicks(to_remove)
Test("RemovePicks_02")
#check that the returned list matches
#what we expect
TestValueEQ("Removed expected picks", removed, expected)
ClearPickPoints()
PickByZone(0)
PickByZone(18)
Test("RemovePicks_03")
to_remove = "A, C, D, E"
expected = "E"
removed = RemovePicks(to_remove)
Test("RemovePicks_04")
TestValueEQ("Removed expected picks 2", removed, expected)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestRemoveLabeledPicks():
OpenDatabase(data_path("mili_test_data/single_proc/sslide14ball_l.plt.mili"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "Primal/shell/bend_magnitude")
pickAtts = GetPickAttributes()
pickAtts.showPickHighlight = 1
SetPickAttributes(pickAtts)
DrawPlots()
options = {}
options["element_label"] = "shell 1"
PickByZoneLabel(options)
options["element_label"] = "shell 2"
PickByZoneLabel(options)
options["element_label"] = "shell 5"
PickByZoneLabel(options)
Test("RemoveLabeledPicks_00")
to_remove = "shell 1, shell 2, shell 19"
removed = RemovePicks(to_remove)
Test("RemoveLabeledPicks_01")
expected = "shell 1, shell 2"
TestValueEQ("Removed expected shell", expected, removed)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestSwivelFocus():
ResetPickAttributes()
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
ResetView()
OpenDatabase(silo_data_path("globe.silo"))
TurnOffAllAnnotations()
AddPlot("Mesh", "mesh1")
DrawPlots()
v = GetView3D()
v.viewNormal = (-0.461806, -0.673199, 0.577526)
v.focus = (0., 0., 0.)
v.viewUp = (-0.243052, 0.722237, 0.647532)
v.viewAngle = 30
v.parallelScale = 17.3205
v.nearPlane = -34.641
v.farPlane = 34.641
v.imagePan = (0.341463, 0.234840)
v.imageZoom = 1.21
SetView3D(v)
orig_atts = GetPickAttributes()
fh_atts = GetPickAttributes()
fh_atts.swivelFocusToPick = 1
SetPickAttributes(fh_atts)
PickByNode(element=707)
Test("SwivelFocus_00")
SetPickAttributes(orig_atts)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestSwivelHighlight():
ResetPickAttributes()
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
ResetView()
OpenDatabase(silo_data_path("globe.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "v")
DrawPlots()
orig_atts = GetPickAttributes()
fh_atts = GetPickAttributes()
fh_atts.overridePickLabel = 1
fh_atts.forcedPickLabel = "fhpick"
fh_atts.showPickHighlight = 1
fh_atts.swivelFocusToPick = 1
fh_atts.showPickLetter = 0
SetPickAttributes(fh_atts)
PickByZone(element=580)
Test("SwivelHighlight_00")
SetPickAttributes(orig_atts)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestNodeHighlight():
ResetPickAttributes()
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
ResetView()
OpenDatabase(silo_data_path("globe.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "v")
DrawPlots()
pAtts = GetPickAttributes()
pAtts.showPickHighlight = 1
pAtts.pickHighlightColor = (230, 100, 0)
SetPickAttributes(pAtts)
PickByNode(800)
pAtts.pickHighlightColor = (0, 0, 255)
SetPickAttributes(pAtts)
PickByNode(600)
pAtts.pickHighlightColor = (255, 0, 0)
SetPickAttributes(pAtts)
PickByNode(1000)
Test("NodeHighlight_00")
ResetPickAttributes()
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestTranslatedHighlight():
ResetPickAttributes()
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
ResetView()
OpenDatabase(silo_data_path("globe.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "v")
AddOperator("Transform")
TransformAtts = TransformAttributes()
TransformAtts.doScale = 1
TransformAtts.scaleOrigin = (0, 0, 0)
TransformAtts.scaleX = 1
TransformAtts.scaleY = 2
TransformAtts.scaleZ = 1
TransformAtts.doTranslate = 1
TransformAtts.translateX = 100
SetOperatorOptions(TransformAtts)
DrawPlots()
pAtts = GetPickAttributes()
pAtts.showPickHighlight = 1
SetPickAttributes(pAtts)
PickByZone(element=580)
Test("TranslatedHighlight_00")
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
def TestPickingExpression():
ResetPickAttributes()
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
ResetView()
OpenDatabase(silo_data_path("curv3d.silo"))
TurnOffAllAnnotations()
AddPlot("Pseudocolor", "mesh_quality/jacobian")
DrawPlots()
PickByZone(element=100)
result = GetPickOutput()
PickByNode(element=100)
result += GetPickOutput()
TestText("TestPickingExpression_00", result)
ClearPickPoints()
DeleteAllPlots()
ResetPickLetter()
CloseDatabase(silo_data_path("curv3d.silo"))
def PickMain():
Pick3DTo2D()
Pick2D()
PickOnionPeel()
PickSubset()
PickMatFracsThreshold()
PickReflect()
PickFilledBoundary()
PickMultiBlock()
PickSurface()
PickBigSilMat()
PickOnionPeel2()
PickSpecMix()
PickCurve()
PickMultiWindow()
PickAfterEngineClosed()
PickAfterEngineCrashed()
PickBoundary()
PickVectorPlots()
PickPointMeshes()
PickGlobalIds()
PickExpressions()
PickAMR()
PickSamrai()
PickIndexSelect()
PickTensors()
PickMili()
PickContour()
PickBox()
PickScatter()
PickHighlight()
PickHighlightColor()
PickRange()
TestRemovePicks()
TestRemoveLabeledPicks()
PickLines3D()
PickZoneLabel()
PickNodeLabel()
PickRangeLabel()
TestSwivelFocus()
TestSwivelHighlight()
TestNodeHighlight()
TestTranslatedHighlight()
TestPickingExpression()
# Call the main function
TurnOnAllAnnotations()
PickMain()
Exit()