databases/mili.py# ----------------------------------------------------------------------------
# CLASSES: nightly
#
# Test Case: mili.py
#
# Tests: mesh - 3D unstructured, multi-domain
# plots - Pseudocolor, material, vector, tensor, label
#
#
# Programmer: Alister Maguire
# Date: May 22, 2019
#
# Modifications:
#
# Alister Maguire, Mon Aug 5 13:02:05 MST 2019
# Added a test that handles .mili files containing integers in
# scientific notation.
#
# Alister Maguire, Thu Dec 19 13:40:07 PST 2019
# Added a test to make sure correct subrecord offsets are used.
#
# Alister Maguire, Wed Jul 15 13:38:17 PDT 2020
# Added test sections and derived variable test.
#
# Alister Maguire, Wed Mar 24 16:06:33 PDT 2021
# Added a test for setting/changing the global integration point.
#
# Alister Maguire, Fri Mar 26 10:25:08 PDT 2021
# Added more tests for derived variables (stress, strain, sand mesh).
#
# ----------------------------------------------------------------------------
RequiredDatabasePlugin("Mili")
single_domain_path = data_path("mili_test_data/single_proc/")
multi_domain_path = data_path("mili_test_data/multi_proc/")
def TestComponentVis():
TestSection("Vector components")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Pseudocolor", "Primal/Shared/edrate")
DrawPlots()
Test("mili_brick_comp")
ChangeActivePlotsVar("Primal/beam/svec/svec_x")
Test("mili_beam_comp")
ChangeActivePlotsVar("Primal/node/nodacc/ax")
Test("mili_nodacc_comp")
DeleteAllPlots()
def TestSharedElementSets():
TestSection("Shared element sets")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Pseudocolor", "Primal/Shared/strain/exy")
DrawPlots()
Test("mili_shared_es_01")
ChangeActivePlotsVar("Primal/Shared/edrate")
Test("mili_shared_es_02")
ChangeActivePlotsVar("Primal/Shared/stress/sy")
Test("mili_shared_es_03")
DeleteAllPlots()
def TestNonSharedElementSets():
TestSection("Non-shared element sets")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
#
# eps is a section of an element set that is only
# defined on beams.
#
AddPlot("Pseudocolor", "Primal/beam/eps")
DrawPlots()
Test("mili_non_shared_es_01")
DeleteAllPlots()
def TestMaterialVar():
TestSection("Material variables")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Pseudocolor", "Primal/mat/matcgy")
DrawPlots()
Test("mili_mat_var_01")
ChangeActivePlotsVar("Primal/mat/matke")
Test("mili_mat_var_02")
DeleteAllPlots()
def TestTensors():
TestSection("Tensors")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Tensor", "Primal/Shared/stress")
DrawPlots()
Test("mili_tensors_01")
ChangeActivePlotsVar("Primal/Shared/strain")
Test("mili_tensors_02")
DeleteAllPlots()
def TestVectors():
TestSection("Vectors")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Vector", "Primal/node/nodpos")
DrawPlots()
Test("mili_vectors_01")
ChangeActivePlotsVar("Primal/shell/bend")
Test("mili_vectors_02")
ChangeActivePlotsVar("Primal/beam/svec")
Test("mili_vectors_03")
DeleteAllPlots()
def TestSandMesh():
TestSection("Sand mesh")
OpenDatabase(single_domain_path + "/m_plot.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(101)
#
# First, let's look at the sand variable on a non-sanded mesh.
# It should be well structured.
#
AddPlot("Mesh", "mesh1")
AddPlot("Pseudocolor", "Primal/Shared/sand")
DrawPlots()
Test("mili_sand_mesh_01")
DeleteAllPlots()
#
# Now let's view the sand mesh. It's a mess.
#
AddPlot("Mesh", "sand_mesh1")
AddPlot("Pseudocolor", "Primal/Shared/sand")
DrawPlots()
Test("mili_sand_mesh_02")
#
# Now let's look at sand in its sanded state.
#
ChangeActivePlotsVar("sand_mesh/Primal/Shared/sand")
DrawPlots()
Test("mili_sand_mesh_03")
#
# We need to make sure that other variables can also be
# viewed in their sanded state.
#
ChangeActivePlotsVar("sand_mesh/Primal/shell/stress_mid/sx")
Test("mili_sand_mesh_04")
DeleteAllPlots()
def TestMaterials():
#
# The tests need to be in this order to work around a bug in
# the filled boundary plot with getting colors from a database
# that causes the colors to be set the same for subsequent
# filled boundary plots where the colors are not set in the
# database.
#
TestSection("Materials")
OpenDatabase(single_domain_path + "/sslide14ball_l.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(12)
AddPlot("FilledBoundary", "materials1")
DrawPlots()
Test("mili_materials_00")
DeleteAllPlots()
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(70)
AddPlot("FilledBoundary", "materials1(mesh1)")
DrawPlots()
Test("mili_materials_01")
DeleteAllPlots()
def TestMultiDomain():
TestSection("Multi-domain")
OpenDatabase(multi_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Pseudocolor", "Primal/Shared/strain/exy")
DrawPlots()
Test("mili_multi_dom_01")
ChangeActivePlotsVar("Primal/Shared/stress/sz")
Test("mili_multi_dom_02")
DeleteAllPlots()
def TestParticles():
TestSection("Particles")
OpenDatabase(single_domain_path + "/sslide14ball_l.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(0)
AddPlot("Pseudocolor", "Primal/particle/stress/sxy")
DrawPlots()
Test("mili_particle_01")
DeleteAllPlots()
def TestStaticNodes():
TestSection("Static nodes")
OpenDatabase(single_domain_path + "/m1_plot.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
AddPlot("Mesh", "mesh1")
AddPlot("Pseudocolor", "Primal/node/temp")
SetTimeSliderState(10)
DrawPlots()
Test("mili_static_nodes_01")
DeleteAllPlots()
def TestLabels():
TestSection("Labels")
OpenDatabase(single_domain_path + "/d3samp6.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Pseudocolor", "Primal/Shared/edrate")
AddPlot("Label", "OriginalZoneLabels")
DrawPlots()
Test("mili_zone_labels_01")
DeleteAllPlots()
AddPlot("Pseudocolor", "Primal/Shared/edrate")
AddPlot("Label", "OriginalNodeLabels")
DrawPlots()
Test("mili_node_labels_01")
DeleteAllPlots()
def TestSciNotation():
TestSection("Sci notation read")
#
# Some .mili files contain integers in scientific notation.
# These need to be handled appropriately.
#
OpenDatabase(single_domain_path + "/HexModel1.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
AddPlot("Pseudocolor", "Primal/brick/stress/sx")
DrawPlots()
Test("mili_from_sci_not")
DeleteAllPlots()
def TestMultiSubrecRead():
TestSection("Multi-subrecord read")
#
# This tests a bug fix that occurred when loading variables
# that span several subrecords at different offsets.
#
OpenDatabase(single_domain_path + "/test4_0.15.plt.mili")
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
AddPlot("Pseudocolor", "Primal/brick/stress/sx")
DrawPlots()
Test("mili_subrec_offset")
DeleteAllPlots()
def TestDerivedVariables():
TestSection("Derived variables")
OpenDatabase(single_domain_path + "/m_plot.mili")
v = GetView3D()
v.viewNormal = (0.49, 0.19, 0.85)
SetView3D(v)
SetTimeSliderState(85)
#
# Node centered derivations.
#
AddPlot("Pseudocolor", "Derived/node/displacement/dispx")
DrawPlots()
Test("mili_derived_00")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/node/displacement/dispy")
DrawPlots()
Test("mili_derived_01")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/node/displacement/dispz")
DrawPlots()
Test("mili_derived_02")
DeleteAllPlots()
AddPlot("Vector", "Derived/node/displacement")
DrawPlots()
Test("mili_derived_03")
DeleteAllPlots()
AddPlot("Pseudocolor", "sand_mesh/Derived/node/displacement/dispz")
DrawPlots()
Test("mili_derived_04")
DeleteAllPlots()
#
# Stress/strain derivations. In m_plot, only stress comes from
# the database, and we derive strain and all of its derivations
# using VisIt expressions.
#
AddPlot("Pseudocolor", "Derived/brick/stress/prin_stress/2")
DrawPlots()
Test("mili_derived_05")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/brick/stress/pressure")
DrawPlots()
Test("mili_derived_06")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/Shared/strain/almansi/max_shear_almansi")
DrawPlots()
Test("mili_derived_07")
DeleteAllPlots()
AddPlot("Pseudocolor",
"Derived/Shared/strain/green_lagrange/prin_dev_green_lagrange/2")
DrawPlots()
Test("mili_derived_08")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/Shared/strain/infinitesimal/x")
DrawPlots()
Test("mili_derived_09")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/Shared/strain/rate/yz")
DrawPlots()
Test("mili_derived_10")
DeleteAllPlots()
AddPlot("Pseudocolor", "sand_mesh/Derived/Shared/strain/rate/yz")
DrawPlots()
Test("mili_derived_11")
DeleteAllPlots()
AddPlot("Tensor", "Derived/Shared/strain/green_lagrange")
DrawPlots()
Test("mili_derived_12")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/Shared/relative_volume")
DrawPlots()
Test("mili_derived_13")
DeleteAllPlots()
AddPlot("Pseudocolor", "Derived/Shared/volumetric_strain")
DrawPlots()
Test("mili_derived_14")
DeleteAllPlots()
def TestGlobalIntegrationPoint():
TestSection("Global integration point")
db_path = single_domain_path + "/d3samp6.plt.mili"
OpenDatabase(db_path)
v = GetView3D()
v.viewNormal = (0.9, 0.35, -0.88)
SetView3D(v)
SetTimeSliderState(90)
AddPlot("Pseudocolor", "Primal/Shared/strain/exy")
DrawPlots()
mili_options = GetDefaultFileOpenOptions("Mili")
mili_options["Global integration point"] = "Inner"
SetDefaultFileOpenOptions("Mili", mili_options)
ReOpenDatabase(db_path)
Test("mili_global_ip_00")
mili_options = GetDefaultFileOpenOptions("Mili")
mili_options["Global integration point"] = "Middle"
SetDefaultFileOpenOptions("Mili", mili_options)
ReOpenDatabase(db_path)
Test("mili_global_ip_01")
mili_options = GetDefaultFileOpenOptions("Mili")
mili_options["Global integration point"] = "Outer"
SetDefaultFileOpenOptions("Mili", mili_options)
ReOpenDatabase(db_path)
Test("mili_global_ip_02")
DeleteAllPlots()
CloseDatabase(db_path)
def Main():
TestComponentVis()
TestNonSharedElementSets()
TestSharedElementSets()
TestMaterialVar()
TestTensors()
TestVectors()
TestSandMesh()
TestMaterials()
TestMultiDomain()
TestParticles()
TestStaticNodes()
TestLabels()
TestSciNotation()
TestMultiSubrecRead()
TestDerivedVariables()
TestGlobalIntegrationPoint()
Main()
Exit()